Part Number: SN65HVD888 Hi team,
Could you tell me if we can return to normal mode from the latched the polarity-correcting mode after powered up the device? If no, we should shutdown the device to return to the normal mode?
Best regards,
Takeshi…
Part Number: SN65HVD888 what is the maximum current in Differential A and B in RS485 as it is not mentioned in the datasheet.
Please intimate the same.
Part Number: SN65HVD888 Hi Team,
One of our customer is using SN65HVD888 and having following queries, in the application where it is used for more than 200 nodes with any node can be master at a time,
Can we have all nodes to be with 888 device…
Other Parts Discussed in Thread: SN888C , SN65HVD888 Hello,
I found that TI has two similar product SN888C and SN65HVD888.
I was not able to find differences between this two products.
Could someone explain what is the deference between these two…
Other Parts Discussed in Thread: SN65HVD888 , SN65HVD72 , SN65HVD82 Customer meet a technical issue about SN65HVD888. 10K ohm pull up resistor in "R" PIN (pin 1) is not added as our reference design. Customer found that 5 units in thousands units can…
Part Number: AM26LV31 Other Parts Discussed in Thread: THVD1505 , SN65HVD888 Tool/software: Hello all,
We replaced some DS26LV31TM's with AM26LV31C's expecting a direct replacement. After doing the change, it seems like we are getting reversed polarity…
Part Number: THVD1500 Other Parts Discussed in Thread: THVD1505 , SN65HVD888 Tool/software: Hi,
My customers before are using 485 transceiver from competitors and are used to add 10kohm pull up resistor on A pin and 10kohm pull down resistors on B pins…
Part Number: UCC12040 Other Parts Discussed in Thread: SN65HVD888 , ISO7741 I want to use UCC12040 as power supply for two channel 5V ISO RS-485(ISO7741+SN65HVD888).
Can the UCC12040 drive these load? what will happen when the output current exceed…
Part Number: THVD1450 Other Parts Discussed in Thread: THVD1420 , THVD1449 , , SN65HVD888 Hello Expert,
We are testing CS (Conduction Immunity) Certification for EMC Test, there is a problem that the communication was cut off, So we are trying to replace…
Hi Jerry,
Would something like SN65HVD888 suit your needs? It is an RS-485 transceiver with automatic polarity correction, so communications can still work whether the differential bus pair is wired normally or inverted. It has a high level of integrated…