Part Number: SN65HVDA540-Q1 Other Parts Discussed in Thread: TCAN4550 Is the maximum DS specification for bus Voltage also valid for differential Voltages at CANH / CANL ?
I.e. if CANH=32V & CANL=GND, is device able to withstand ?
If not, what are…
Part Number: SN65HVDA540 Other Parts Discussed in Thread: AWR1443 , Hi,
I am using AWR1443 development board for my application. For CAN communication 1443 uses SN65HVDA540 IC. CAN communication was fine. But suddenly without any change in hardware as well…
Part Number: SN65HVDA540 Hello, Would the device be perfectly fine when 5V is supplied to CANH,L pins while it is off?
I do see that the abs max for CANH and CANL is -27V to 40V in the datasheet. Does this mean that there won't be any problems? Tha…
Part Number: SN65HVDA540-Q1 Hello Team,
My customer is looking for a product Low speed CAN transceiver.
They want products with Vcc of 5V and Vio of 3.3V.
So. I will propose SN65HVDA540-Q1.
Does the SN65HVDA540-Q1 support the Low speed CAN standard(ISO11898…
Other Parts Discussed in Thread: SN65HVDA540-Q1 Hi Expert,
I confirmed datasheet of "SN65HVDA540-Q1".
According to this datasheet, user can input 3.3V to VIO and 5V to Vcc.
(Please refer to figure 16 Typical Application Using 3.3-V I/O Voltage…
Part Number: AWR1443BOOST Other Parts Discussed in Thread: AWR1443 , SN65HVDA540 Hello,
As i am having AWR1443 Boost with with PROC010 REV A . As per the AWR1443 user guide which says
2.4.3 CAN Interface Connector (for AWR1443) The J3 connector provides…
Please check the VIH in the transceiver datasheet. The VIH is 0.7*5=3.5V which is higher than the MCU I/O output voltage . Like the transceiver output to the MCU to higher than than the MCU VIH. You will need a level shifter.
Hello McCrea san,
Thank you for your support.
I will propose this reference design.
Can we porpose the SN65HVDA540-Q1 for CAN tranceiver?
The SN65HVD1050 has Silent Mode , however the SN65HVDA540-Q1 has Standby mode.
Thus, we can disable the receiver…
Other Parts Discussed in Thread: SN65HVDA1050A-Q1 , SN65HVDA542-Q1 , SN65HVDA540-Q1 , HVDA551-Q1 Hello ,
I needed some information on CAN in TI piccolo.
1. What are the recommended CAN transceivers for the TI piccolo (28069)?
2. Are there any development…