Part Number: SN65HVS881 Hi Folks,
According to the datasheet: https://www.ti.com/lit/ds/symlink/sn65hvs881.pdf?HQS=dis-mous-null-mousermode-dsf-pf-null-wwe&ts=1679662106302&ref_url=https%253A%252F%252Fhu.mouser.com%252F
Please consider the Figure…
Part Number: SN65HVS881 Other Parts Discussed in Thread: TIC12400-Q1 I have a customer currently using the MC33978. Our SN65HVS881 is not pin2pin with it and hard to push them to evaluate. Do we have any selling points or a comparison table with SN65HVS881…
Part Number: SN65HVS881 Hi team,
My customer use many pcs SN65HVS881 in their I/O board.
it have production. But they found SN65HVS881 5VOP pin short circuit to GND, which often happen. Below is their SCH.
Do you have any suggestions?
Thanks!
Part Number: SN65HVS881 Hi All,
We have selected this SN65HVS881 IC for our applications.
But, we want to know, whether this IC will support for multiple bit parity error check ?
If this IC is not supported, how to handle the multiple bit parity…
Part Number: SN65HVS881 Hi, staff Please ask questions on SN65HVS881PWPR (Serializer).
When IP terminal is not used (not used), Is there any problem with the RE terminal open?
best regards cafain
Part Number: SN65HVS881 Hi,
According the datasheet, in a type-2 switch application with two inputs in parallel one of the REx pins should be connected to the LED and the other one to GND, why can't it be left unconnected?
Regards,
Hi Helen
the issue is partially resolved... initially data was pulled out from 881ic at 10Hz clock frequency.....when the frequency was increased to 100khz data was coming properly and probing effect has gone....also i shorted the resistance in series…
Part Number: SN65HVS881
E2E,
We have a question for you: the debounce filter can be setup with DB0/DB1 pins. Can they program the debounce filter during normal operation/on the fly ? or they should do it only at start up?
Do we have any device…
Part Number: SN65HVS881 Other Parts Discussed in Thread: MUX508 , DRV8804 Is it possible to connect these two pins (one input, one output) to the same node? Customer has run out of GPIO pins and needs to combine. He can set the pin as Input or output…
