Part Number: SN65LBC180 Other Parts Discussed in Thread: SN75LBC180 , Hi team, My customer is trying to migrate from SN75LBC180 to SN65LBC180. They have different VOD range in different temperature range as follows:
SN75LBC180: |VOD| 1.5V-5V under 0 to …
Part Number: SN65LBC180 Tool/software: We are using the IC SN65LBC180 in our design for RS485 communication and generally full duplex IC can be used as an half duplex IC by shorting the positive and the negative signals together.
during our testing of…
No issue at all, main thing is it will just eat up more power since current will flow from Vcc to GND through those resistors.
RS-485 states the max 'unit load' in a system needs to be 32 unit loads or less. I believe each unit load is defined as 1mA…
Part Number: SN65LBC180 Other Parts Discussed in Thread: THVD1512 , THVD1552 I still have some questions about RS485 (SN65LBC180DR),
Whether termination is required ? If yes, What is the value and whether it is required for both the ends ?
Since we observe…
Part Number: SN65LBC180 Hi team,
Could you help check the SN65LBC180DR Differential input capacitance ? We could not find this data in the datasheet?
Thanks
Lillian
Part Number: SN65LBC180 Hi team,
My customer is using SN65LBC180RSAR and found that the thermal resistance has changed from 43.8C/W to 35.6C/W in the datasheet. According to PCN, the device had design change of die shrink. My customer assumes that the die…
Part Number: SN65LBC180 Hi
There is a crack on the pin of this product, please help to confirm the cause of this and whether it affects the use, thank you
Part Number: SN75LBC180 Other Parts Discussed in Thread: SN65LBC180 Hi,
We can see the difference between SN75LBC180 and SN65LBC180 on D/S as follows,
(only about Differential output voltage magnitude)
Can we consider SN65LBC180 will be the same minimum…
Part Number: SN65LBC180 Other Parts Discussed in Thread: THVD1552 Could you please tell me what is the difference between SN65LBC180DR, SN65LBC180ADR and THVD1552DR?
I hope the infomation of comparison table and if there is some difference at die.
Part Number: SN65LBC180-Q1 Hi Team,
we have been using the SN65LBC180IDRQ1 as we are required to only use automotive qualified parts for our project.
Is there any automotive qualified successor or replacement you could recommend? Or any data to increase…
