Part Number: SN65LVCP418 Hi Team, Customer would like to use SN65LVCP418 to implement the demo. Here is the block diagram. Could you please provide your comment for this block diagram?
customer has questions about SN65LVCP418 as below 1.VCC、RESN、I2C_EN…
Hi Rafael,
XAUI is not exactly supported protocol it is an application example.
You can use this devices with any signal with data rate below 4.25Gbps.
For this devices inputs are VML( and CML capable), outputs are VML.
If your signal has these…
good, I need help with this IC I need to know if it works as equalizer and if I can use it with other protocols than XAUI, I use to ASI inputs. I can? thank you.
Other Parts Discussed in Thread: SN65LVCP418 Hi folks - can you help with these detailed questions below?
I have some questions regarding the SN65LVCP418 datasheet:
1. Table 1 Timing
I2C Timing: On page 13, in Table 1 (I2C Timing), line 5 for the…
Joseph,
SN65LVCP418 uses TI BICOM3 process technology which is a BICMOS (SiGe) process node. We do not have specific NSEU data but the reliability data that we do have is at:
http://focus.ti.com/quality/docs/singlesearchresults.tsp?&templateId…
Other Parts Discussed in Thread: SN65LVCP418 All,
Have a customer with an Noise Issue using the SN65LVCP418 AC Coupled to a Quadrex (not twisted pair) Cable to transit DVI signals. The box and hardware of the system is well shielded and the cable connects…
Mike,
I believe the 3-state register bit should be listed as R/W. This is a documentation error. The line separating the R/W from the R section is drawn in the incorrect row. You can look at the SN65LVCP408 data sheet as an example. We will look…
Other Parts Discussed in Thread: SN65LVCP418 Reposted from an email thread
_______________________________________________________________________________________________________________________________________________________________
Hello Brian…
Hi Moises,
I have question about SN65LVCP418 as below
1.VCC、RESN、I2C_EN sequence?
2.RESN active：internal or external ?
If external , RESN pin from high to low , need to be keep low or high?
Thanks,
SHH
