Part Number: SN65LVDM176 Hello,
I am using a COTS FPGA solution system containing the TI SN65LVDM176 to test an m-LVDS transceiver in a simple non-multipoint application. On another forum, it seems that this LVDM transceiver may be compatible with m…
Part Number: SN65LVDM176 Greetings,
There was the initiative from the IBIS specialist group to fix the issue in a timely manner with PN SN65LVDM176. We at Lockheed Martin Space design group have reached a critical point where the need of fixing this…
Part Number: SN65LVDM176
When using Hyperlynx, the IBIS model for SN65LVDM176 show excessive glitching and considerable delay under a simplistic setup. Other vendors of exact function type show expected response.
I am attaching two simulation scope…
Part Number: SN65LVDM176 Other Parts Discussed in Thread: SN65LVDM050-Q1 , SN65LVDM1676 Hello,
we currently use MLVDS drivers for communication between numerous peripherals (16) and a central system. The choice of MLVDS may not be the best one, as we…
Part Number: SN65LVDM176 Other Parts Discussed in Thread: TDP142 Hi
I suppose to use SN65LVDM176 for AUX channel of Displayport.
Could you please see the following sheet?
e2e_0603.xlsx
1. Is it possible to use SN65LVDM176 in such a use?…
Hello Jacob,
Here are the thermal parameters for SN65LVDM176 D. The max junction temperature is 125C.
Theta JA-High K:
118.5
Theta JC, top:
57.7
Theta JB:
62.2
Psi JT:
12.4
Psi JB:
61.4
Regards,
Y…
Part Number: SN65LVDM176 Hello,
We have a customer looking for the Maximum Rated Load Current, and Maximum Rated Junction Temp.
Could someone please advise?
Thanks,
Part Number: SN65LVDM176 Hi
We can see typical pulse skew of driver and receiver as 0.2ns and 0.4ns by each.
Do you have max/min value of that?
It is no problem if it is just reference value (not guaranteed).
BestRegards
Part Number: SN65LVDM176 Other Parts Discussed in Thread: ISO7821LL , ISO7710 , SN6501 I inherited a design using SN65LVDM176 half-duplex LVDS transceiver. Speeds in application are fairly pedestrian (up to 25mbps). The LVDS pair is sent between 2 separate…
Part Number: SN65LVDM176 Hi
1.
Is there limitation of maximum output current from R terminal (1 pin) for the receiver?
2.
According to the Figure 11, 12 of datasheet, sink current is ~55mA and source current is ~62mA.
Are these maximum?…
