Part Number: SN65LVDS047 Tool/software: Hello,
Our customer is trying to determine what the ESD ratings are for a couple TI parts. Would you be able to provide that for them? We were unable to find it in the device datasheets for this device.
Part Number: SN65LVDS047 Other Parts Discussed in Thread: DS90LV047A , SN65LVDS31 Tool/software: Hello, At SN65LVDS047, how much ps is the additive rms jitter spec in 10KHz to 20MHz offset range? Best regards, K.Hirano
Part Number: SN65LVDS047 Hello, My customer provides 40%-60% duty cycle clock to Dinx. In this case, how much duty cycle output would be achieved? Could it be roughly estimated as 35%-65%? Best regards, K.Hirano
Part Number: SN65LVDS047 Other Parts Discussed in Thread: SN65LVDS048A Hi team,
Use SN65LVDS047 and SN65LVDS048A to communicate and connect with network cable. The length of the wire is about 5 meters. The differential pin is easy to be damaged. The…
Part Number: SN65LVDS047 Hi,
Good Day.
Customer have to design an analog line driving circuit for an Ethernet connection (RJ45). With the functionality of the 100BASE-TX standard, this includes MLT-3 and the transmit frequency of 31.25MHz. He found…
Part Number: SN65LVDS047 Hi support team.
I am asked regarding the specification of tsk(lim) from my customer.
Note on datasheet "tSK(lim) is defined as |Min - Max| differential propagation delay."
-> Maximum tsk(lim) is 1.2ns on the datasheet.…
Part Number: SN65LVDS047 Hi support team.
My customer asked about the following post.
https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1100053/sn65lvds047-regarding-tsk-lim
Are tpLH and tpHL specified between channels, not…
Hi I.K.
I figured out the issue, the footprint for the RJ45 jack I was using had the nets for the 3rd differential output swapped with another net, so I was not actually looking at the output of the 3rd driver when I thought I was. Once I probed the…
Part Number: SN65LVDS047 Other Parts Discussed in Thread: SN65LVDS93A Hi Team,
My customer need a LVDS driver that can be connected with THC63LVD104C on another board, do we have such solution that is compatible with it? Thanks a lot!
BR
Rory W…
