Hello Team,
the text below the package pictures on the first page of the data sheet tells "110 Ohm Resistor for LVDT only".
Does this mean: an external resisitor is required for LVDT or the resistor is integrated?
According the AVAILABLE OP…
Part Number: SN65LVDT2 Other Parts Discussed in Thread: DS90LT012AQ-Q1 , SN65LVDS2 , DS90LT012A , DS90LV012A Hi Team,
Can you suggest an alternative for SN65LVDT2? I found SN65LVDS2 however, the SOT23 package is out of stock. Is DS90LT012AQ-Q1 a good alternative…
Part Number: SN65LVDS1 Other Parts Discussed in Thread: SN65LVDS2 , Hi team,
I'm looking for SN65LVDS2/4 companion LVDS driver which can work with 2.5V.
The application is SPI-to-LVDS bridge for the board-to-board communication.
For the sake of limi…
Hi Michael,
SN65LVDS2 / SN65LVDS4 seems similar to my application.
However, signal rate in my application is 1Gbps.
I think your recommendations operate up to 500Mbps.
Do you have other recommendation which is suitable to faster speed (1Gbps) ?
Thanks…
Other Parts Discussed in Thread: SN65LVDS2 , SN65LVDS1 Hello!
Is it possible to use SN65LVDS1 and SN65LVDS2 as a driver and receiver for AES/EBU and SPDIF digital audio signals?
If Yes, then please advise some kind of reference design if there exist one…
Other Parts Discussed in Thread: SN65LVDS2 , SN65LVDS4 , SN65LVDS349 Hi, I'm thinking about using SN65LVDS2 as a comparator for generating 50-100ns delays instead of using 74HC logic.
I'm not sure how to translate the positive/negative going thresholds…
This device is the only 1.8 V receiver in the portfolio.
You can use the SN65LVDS2 at 3.3 V, or at 2.5 V with a small LDO like the TLV713P. If the receiving device needs a 1.8 V signal, translate it down with any buffer with an overvoltage-tolerant input…
Other Parts Discussed in Thread: SN65LVDS1 , SN65LVDS2 Hi,
Do I need to add protection in front of the SN65LVDS2 when the driver (SN65LVDS1) is still operating while the LVDS2 is powered down?
thanks,
Katharina
