Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.



Search tips
Showing 18 results View by: Thread Post Sort by

  • SN65LVDS250: LVDS250 fault mechanisms specifically driving into a 2.5V powered LVDS input.

    TI Thinks Resolved
    Part Number: SN65LVDS250 Hello, I am doing a failure mode analysis for this driver that is on an interface card we use. So is it possible for LVDS250 driver to fault in such a way it would continually supply the 3.3V supply voltage to the receiver and…
    • Answered

  • SN65LVDS250: 1:4 LVDS Switch?

    Resolved
    Part Number: SN65LVDS250 Other Parts Discussed in Thread: DS10BR254 , DS25BR204 Hi Experts, My customer is looking for 1:4 LVDS switch. The first candidate is SN65LVDS250 but it supports four input. We are looking for any best device. In above use-case…
    • Resolved

  • SN65LVDS250: Output voltage

    TI Thinks Resolved
    Part Number: SN65LVDS250 Hi, Im planning to use this IC on board for FPGA interfacing. The o/p pins for eg:1Y and 1Z will be connected to FPGA BANk (1.8V). What are the requirements should i consider for interfacing? 1.8V is enough?? Regards, Harik…
    • Answered

  • SN65LVDS250: Unused inputs

    Resolved
    Part Number: SN65LVDS250 Hello, What should I do on unused LVDS input pins of SN65LVDS250? Should I keep these floating, pull up to supply or pull down to ground?
    • Resolved
    • Answered

  • RE: DS15BR401: Different output voltages

    Resolved
    Hi Friedrich, SN65LVDS250 should be fine as well. Main point is to isolate inputs and outputs. Regards,Nasser

  • Unused LVDS pin of SN65LVDS250

    Other Parts Discussed in Thread: SN65LVDS250 Dear Technical Support Team, I have a quesiont about unused LVDS pins of SN65LVDS250. Which is better for them? １） Open ２） （＋）Side ⇒ 10KΩ pull-up （－） side ⇒　10KΩ pull-down Best Regards, …

  • About test data of SN65LVDS250

    TI Thinks Resolved
    Other Parts Discussed in Thread: SN65LVDS250 Is there test data information of SN65LVDS250? For example, LVDS waveform for 1～5m range and CAT5 cable, or severe condition than it. ※I want to know possibility of attenuate. Best regards, Satoshi

  • Attenuation about DS92LV18 and SN65LVDS250

    Other Parts Discussed in Thread: DS92LV18 , SN65LVDS250 , DS10CP154A Customer is evaluating DS92LV18. In the case of between SN65LVDS250, attenuate is larger than DS92LV18 only. Image and waveform is below, ①DS92LV18 ⇒ SN65LVDS250 ⇒ DS92LV18 　 …

  • About distance / attenuation spec of DS92LV18 and SN65LVDS250

    Other Parts Discussed in Thread: SN65LVDS250 , DS92LV18 Customer already designed to use both DS92LV18 and SN65LVDS250 like below. -------------------------------------------------------------------------------------------------------------------------…

  • About lock function of SN65LVDS250

    Other Parts Discussed in Thread: SN65LVDS250 Please let me know about Lock(Sync) function of SN65LVDS250. ※In the use case of 1:4 ch. ①Is this device have lock function? ②If SN65LVDS can lock, what will happen in the case of 1:4? 　・1:4 all channel will…

Didn't find what you are looking for? Post a new question.