Search tips
Showing 7 results View by: Thread Post Sort by

  • SN65LVDS32B: Adding 100 Ohms across multiple LVDS receivers

    TI Thinks Resolved
    Part Number: SN65LVDS32B Hi E2E, As mentioned in the application report SLLA031A , the resistor divider circuit is used in front of each LVDS channel that will receive 422 signals. In a multidrop configuration, the termination is usually only on the…

  • RE: Differential to single end solution proposal in the front of RS422

    Hi Antony, They can use an LVDS receiver like SN65LVDS32B. Please see here: http://www.ti.com/lit/an/slla031a/slla031a.pdf Regards, I.K.

  • SN65LVDT388A: Pin compatible part with active fail-safe

    TI Thinks Resolved
    Part Number: SN65LVDT388A Other Parts Discussed in Thread: SN65LVDS32B , DSLVDS1048 Hi, We use the part SN65LVDT388ADB in one of our application. Now we have the problem that under certain circumstances the inputs can get shorted to GND. Does TI has a…
    • Answered

  • RE: SN65LVDS31: Driving 150ft cable

    Resolved
    LVDS_AppAndDataHandbook_slld009.pdf Hello Alec, Please see the attached document that discuss the data transmission basics on LVDS. Regards, Gerardo
    • Answered

  • RE: SN55LVDS31/SN55LVDS32 question

    Resolved
    Hello Mike, This problem could be caused by the large shift in common mode that the receiver encounters when the inputs are pulled to Vcc as the driver outputs go into a high impedance state. The section about "Terminated Failsafe" in this app note…

  • RE: TIA/EIA644-A vs TIA/EIA644

    Please see 1-8, 1-9 in the attached.
    • slld009.pdf
    • Answered

  • Re: LVDS receiver works as a comparator ?

    Resolved
    Orikasa-san Yes, we have had customers use LVDS receivers as comparators. I would recommend that the customer look into the SN65LVDS34 (datasheet attached). The LVDS34 is a dual LVDS receiver that takes a 3.3-V supply but can tolerate 5-V inputs. It…
    • sn65lvds34[1].pdf

Didn't find what you are looking for? Post a new question.