Part Number: SN65LVDT2 For SN65LVDT2, can you clarify loading on the receiver outputs?
In Figure 3 and Figure 4 of the DS, it appears we can safely apply various loads to the output and allow for safe operation.
However, if the datasheet, abs max…
Part Number: SN65LVDT2 There appears to be an error in one of the tables in the datashseet. In the pinout table on p4, the description for the LVDS pins lists them as outputs, but they are actually inputs on the receiver. It seems like a copy-paste error…
Part Number: SN65LVDT2
Hi All,
Hope you are well. I have a question about the SN65LVDT2DBVT. The transceiver is used on a current design where the differential input clock is a 125MHz, 3.3 LVCMOS signal. The VCC of this transceiver is at 3.3V as…
Part Number: SN65LVDT2 Hi Team,
Can you give me advise on EMI issue related to SN65LVDT2.
When 12 MHz LVDS signal drives SN65LVDT2, it emits EMI noise
up to several Giga Hertz harmonic noise.
When two 5 pF caps are put between Input A and…
Part Number: SN65LVDT2 Hello team,
Hope you are well. Can you provide some feedback
recently discovered a design defect that results in a RS485 signal being fed to a LVDS receiver. The receiver part number is SN65LVDT2DBVR. Looking at the datasheet…
Bryan,
SN65LVDS4 and SN65LVDT2 were developed many years apart so there are differences in the specification especially for items such as jitter that may have required special testing equipment that may not have been readily available in the time frame…
Other Parts Discussed in Thread: SN65LVDT2 Customer needs to know what the maximum clampig current is for par number SN65LVDT2.
Thanks for your help.
John
