• SN65LVDT33: Differential transceiver being powered up while the receiving transceiver is not powered up

  

  Saxon ZumBerge

  TI Thinks Resolved

  Part Number: SN65LVDT33 Other Parts Discussed in Thread: SN65LVDS31 , Tool/software: I have a differential transceiver (SN65LVDS31 ) being powered up while the receiving transceiver (SN65LVDT33) is not powered up. The main concern is causing…

  • 8 months ago
  • Interface
  • Interface forum

• SN65LVDT33: Unexpected +- 1000ps jitter in data signals due to interference on multiple LVDS lines

  

  Arnout Diels1

  TI Thinks Resolved

  Part Number: SN65LVDT33 Tool/software: Hello, We're seeing an unexpected issue with the SN65LVDT33 part we are using on a board, where we are seeing higher-then-expected jitter on an output signal of the chip when sending a e.g. a 75Mhz clock through…

  • over 1 year ago
  • Interface
  • Interface forum

• SN65LVDT33: Maximum pulse and output skew

  

  Kimberlee Shimizu

  TI Thinks Resolved

  Part Number: SN65LVDT33 Hello, I'm performing a worst-case timing analysis. Could you please provide maximum tsk(p) (Pulse skew) and maximum tsk(o) (Output skew)? I see that only nominal values are presented in the current datasheet. Thank you.

  • over 2 years ago
  • Interface
  • Interface forum

• SN65LVDT33: sn65lvdt33pw maximum temperatures

  

  Harrison Citrin

  TI Thinks Resolved

  Part Number: SN65LVDT33 Hello, can you please provide the maximum operating and survival junction temperatures for part sn65lvdt33pw?

  • over 2 years ago
  • Interface
  • Interface forum
Answered

• SN65LVDT33: SN65LVDT33 Thermal resistance juction to case

  

  Xavier LAURAND

  Resolved

  Part Number: SN65LVDT33 Hi All, I can't find the SN65LVDT33 Thermal resistance juction to case in the data sheet. may you be able to give it to me ? Thanks a lot

  • Resolved

  • over 4 years ago
  • Interface
  • Interface forum
Answered

• SN65LVDT33: Part Number Option

  

  JP

  Resolved

  Part Number: SN65LVDT33 Other Parts Discussed in Thread: SN65LVDS33 Hello Team, When looking at our options for our HS Differential Receivers, it seems like there may be a typo in the chart found in the SN65LVDS33 Datasheet. ( https://www.ti.com/lit…

  • Resolved

  • over 4 years ago
  • Interface
  • Interface forum
Answered

• SN65LVDT33: Could the differential input be floated if the channel is not used?

  

  Xiang Maverick

  Resolved

  Part Number: SN65LVDT33 Other Parts Discussed in Thread: SN65LVDS31-EP , SN65LVDS33-EP 1) Could the differential input of SN65LVDT33-EP be floated if the channel is not used? Is SN65LVDT33-EP orderable since I do not find it in the part number list when…

  • Resolved

  • over 3 years ago
  • Interface
  • Interface forum

• SN65LVDT33: IBIS model shows the max differential input voltage violating datasheet spec

  

  Michael T Schneider

  TI Thinks Resolved

  Part Number: SN65LVDT33 Other Parts Discussed in Thread: SN65LVDS33 Team, Working on simulating a design and The simulation using the SN65LVDT33 part shows the max differential input voltage of ~860-930mV peak-to-peak, which is violating the datasheet…

  • over 4 years ago
  • Interface
  • Interface forum

• SN65LVDT33: How long of a 50 ohm coax cable can this part drive?

  

  KB

  TI Thinks Resolved

  Part Number: SN65LVDT33 I have a design that needs to drive the output of the SN65LVDT33 over a 50 ohm coax cable. What are the length limitations?

  • over 5 years ago
  • Interface
  • Interface forum
Answered

• SN65LVDS31: Driving 150ft cable

  

  Alec Forbes

  Resolved

  Part Number: SN65LVDS31 Other Parts Discussed in Thread: SN65LVDT33 Team- My customer is interested in using the SN65LVDS31 to drive 20Mhz LVDS lines through a 150ft Cat6 ethernet cable to a SN65LVDT33. The datasheet for the LVDS driver has a chart…

  • Resolved

  • over 9 years ago
  • Interface
  • Interface forum

Didn't find what you are looking for? Post a new question.