Part Number: SN65LVDT388A Hi, In the IBIS model of the SN65LVDT388A device the termination resistors are missing. I'm aware of this post: e2e.ti.com/.../1460464
Because the simulation software extract the model out of the schematic I would like to include…
Part Number: SN65LVDT388A Hi, We have an application where we want to transmit data with up to 100Mbit/s with LVDS technology. Therefore we have chosen the SN65LVDT388A device. With a test board that connects the pin 35 (A1Y) to a Xilinx Artix-7 (AC701…
Other Parts Discussed in Thread: SN65LVDT388A , SN65LVDS388A Hello,
I have some questions about SN65LVDT388a.
1. What is the driving capability of this LVDS Receiver?
2. Is it able to drive a 50 Ohm resistor? If not, is there any good ways to make it possible…
I am using this LVDS Receiver to connect a FPGA and my application.
I am just wondering if there is a reference PCB design for this or similar part?
If not, I have few questions about the PCB design:
1. What is the order of layers recommended for…
Other Parts Discussed in Thread: SN65LVDT388A This is just a design question concerning
the LVDT388A in the DBT package.
In my design, I have ground coming in
on the lvds side of the chip connected to the AGND's from an lvds signal. I assume
the GND should…
You are correct. I am connecting output of SN65MLVD047 to SN65LVDT388A with external 100 Ohm termination. Since SN65LVDT388A having internal 100 ohm termination. Together makes 50 ohm termination at the output of SN65MLVD047.
Reason for sele…
WE are doing SI Analysis for our PCB. We are using SN65LVDT386ADBT, SN65LVDT388A,
IBIS model for these 3 parts does not include 100E internal termination.
Please confirm on this whether we need to provide 100E external 100E resistor…