Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.



Search tips
Showing 10 results View by: Thread Post Sort by

  • SN65LVDS31: LVDS source resistance measurement

    TI Thinks Resolved
    Part Number: SN65LVDS31 Other Parts Discussed in Thread: SN65MLVD047 To Whom it May Concern, I am currently reading Lit Number: SLLD009 (LVDS Application and Data Handbook) and was looking at the Precompensation in the Adjusting LVDS output levels section…

  • RE: SN65MLVD047: SN65MLVD047PW-Load current and Ground current

    Hi Srikanth, I am not sure about the specific current values you mentioned in your post, but it is true that SN65MLVD047 has a higher current drive than SN65LVDS391, since the former is M-LVDS device and the later is LVDS device. SN65LVDS391 delivers…
    • Answered

  • SN65MLVD047A: IBIS Model

    Resolved
    Part Number: SN65MLVD047A Other Parts Discussed in Thread: SN65MLVD047 Can you help direct me to an appropriate IBIS for P/N SN65MLVD047APW?
    • Resolved
    • Answered

  • SN65MLVD047 vs SN65MLVD047A ?

    Resolved
    Other Parts Discussed in Thread: SN65MLVD047 What's the difference between these two parts? Everything looks identical. Only slight differences I could find were small variations in the finish (gold/copper) ppm's in the environmental information, but…
    • Resolved

  • SN65LVDT14: max rise time value for A/B inputs missing

    Part Number: SN65LVDT14 Other Parts Discussed in Thread: SN65MLVD047 , DS90LV011A Hello, I was wondering for the SN65LVDT14 IC, whether there is a maximum rise and fall time on A and B inputs during transition? Or are the A and B differential inputs have…
    • Answered

  • RE: DS90LV048A: DS90LV048A

    Resolved
    Hello, 60 ohms is very low and and will degrade the noise margins significantly (for any LVDS driver). As you said, it will put the system on the edge, especially if you add to that the fact that with multiple receivers and only one termination at the…
    • Answered

  • DS91M047: Datasheet doesn't give Min Typ Max value for Rl

    Resolved
    Part Number: DS91M047 Other Parts Discussed in Thread: SN65MLVD047 , I am currently comparing the DS91M047 to the SN65MLVD047. The SN65MLVD047 shows a 30 to 55 ohm load (min/max) for Rl. The datasheet for the DS91M047 only shows characteristics at 50 ohm…
    • Resolved
    • Answered

  • LVDS receive IC replacement - sn65mlvd2 to sn65lvds4

    Resolved
    Other Parts Discussed in Thread: SN65MLVD2 , SN65MLVD047 , SN65LVDS4 Hi All, In the current design I am using TX device: sn65mlvd047 , RX device: sn65mlvd2 I want to replace the RX device to sn65lvds4 from sn65mlvd2. Do you see any issues with this? The reason…
    • Resolved
    • Answered

  • RE: IBIS Model for the SN65MLVD047A

    Resolved
    Hi David, Attached are the IBIS models for the SN65MLVD047 which will work for the SN65MLVD047A. Regards, Mike 7658.SN65MLVD047_IBIS_Model.zip 1018.SN65MLVD047DW_IBIS_Model.zip
    • Answered

  • SN65MLVD047APW MLVDS Driver & SN65MLVD204A MLVDS Receiver compatibility

    Resolved
    Other Parts Discussed in Thread: SN65MLVD204A , SN65MLVD047 My design uses a SN65MLVD047APW MLVDS Driver & SN65MLVD204A MLVDS Receiver. 8 receivers are attached to one driver. We recently changed the receiver from a SN65MLVDS200A and want to be sure…
    • Resolved

Didn't find what you are looking for? Post a new question.