Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: SN65MLVD080 Other Parts Discussed in Thread: P82B96 , P82B715 , SN65LVDS049 , SN65LVDS31 , TIDA-060017 I am looking at the IC to convert single ended to differential because we think the length of the cable is too long for I2C. Therefore, we…
Part Number: SN65MLVD080 Hi TI team,
As is shown in the schematic below, the SN65MLVD080 has 8 channels ,but I only need 6 channels ,how to deal with the unused 2 channels? thanks
Part Number: SN65MLVD080
Dear Technical Support Team,
①When VID = 17.6V (indefinite value) , is it possible to damage or unstable behavior of R port?
②Some transceiver has short mode failsafe, Does SN65MLVD080 have it?
③If SN65MLVD080 doesn't have short…
Other Parts Discussed in Thread: SN65MLVD080 , SN65MLVD082 Hallo, 1) Could you please let me know the failsafe external resistor network for M-LVDS Type-1 receiver? ( It’s maybe okay similarly the failsafe external resistor network for LVDS.) 2) How should…
Part Number: SN65MLVD082 Other Parts Discussed in Thread: SN65MLVD080 , Hello!
I had a question regarding the SN65MLVD082 or SN65MLVD080 pin configuration. When the receiver pin is high, are all the channels now receivers, even when the drive signal is high…
Hi g.f.,
Please use instead the model for SN65MLVD080 available at the link below.
http://www.ti.com/product/SN65MLVD080/toolssoftware
Best regards,
Hassan.
Hi Nikita,
I do not think the charger is the problem, because if the battery is present, the charger won’t behave as you described.
Can you try the following?
Measure the cells voltage of the battery
Try to charge up the battery using…
