• SN74ACT245: ESD information

  

  Cedrick

  TI Thinks Resolved

  Part Number: SN74ACT245 Hi, Good day. Our customer is looking for the ESD information (HBM and CDM) for the SN74ACT245N & SN74ACT245PW. Can you please help us? Thank you for your help. Regards, Cedrick

  • over 3 years ago
  • Logic
  • Logic forum
Answered

• SN74LVT244B: left floating

  

  user4637774

  Resolved

  Part Number: SN74LVT244B Other Parts Discussed in Thread: SN74ACT245 Tool/software: When using the SN74LVT244B chip, pin 1 and pin 19 are connected to the ground. When the input pin is left floating, the output pin can output 3.3V high level signal …

  • Resolved

  • 11 months ago
  • Logic
  • Logic forum
Answered

• SN74ACT245: Does VCC+0.5V of the maximum input voltage range vary with VCC?

  

  rengui sun

  Resolved

  Part Number: SN74ACT245 Other Parts Discussed in Thread: SN74LVC245A The input voltage range in the maximum parameter in the datasheet is -0.5V~VCC+0.5. When the power supply voltage of the SN74ACT245 is 0V, the input voltage is 4V, which will damage…

  • Resolved

  • over 6 years ago
  • Logic
  • Logic forum
Answered

• SN74ACT245: About DIR status

  

  Sho Ogane

  Resolved

  Part Number: SN74ACT245 Hi all. I have a question about DIR status SN74ACT245. DIR has three operation by inputed High signal or Low signal or X. Is DIR status keeped when the device is powered off or be destroyed? Or is it sure to be X state? Best Regards…

  • Resolved

  • over 7 years ago
  • Logic
  • Logic forum

• SN74ACT245: About absolute input voltage range, VI

  

  Sho Ogane

  Part Number: SN74ACT245 Hi all. The absolute input voltage range of SN74ACT245 is -0.5V to Vcc+0.5V. So if we apply voltage 3.5V to DIR pin without supply voltage, I think input currrent will flow when it exceeds 0.5V(abs). But I measured I-V characteristics…

  • over 7 years ago
  • Logic
  • Logic forum

• 74ACT11245: 74ACT11245DBR alternative part

  

  Marvin Cantos

  TI Thinks Resolved

  Part Number: 74ACT11245 Other Parts Discussed in Thread: SN74ACT245 Hi Team, Good day. Our customer is looking for a suggested alternative device for 74ACT11245DBR Please help to advise. Thank you for extending your support. Kind regards, Marvin

  • over 2 years ago
  • Logic
  • Logic forum
Answered

• RE: SN74LVC8T245: Question about VCCA and signal inputs

  

  Clemens Ladisch

  Resolved

  The SN74LVC8T245 pinout is compatible with single-supply transceivers like the SN74AHCT245/SN74ACT245. (Please note that the pinout shown is wrong; pin 23 also is V CCB , and is the only supply for the plain transceiver.)

  • over 2 years ago
  • Logic
  • Logic forum
Answered

• SN54ACT241: Need IBIS model for SN54ACT241

  

  Rahul Ramachandran

  Resolved

  Part Number: SN54ACT241 Other Parts Discussed in Thread: SN74ACT245 Hello, please let me know if we have IBIS model for SN54ACT241.

  • Resolved

  • over 7 years ago
  • Space & High Reliability (Read Only)
  • Space & High Reliability Forum (Read Only)

• RE: Device proposal - SN74AC245, SN74HCT138

  

  ShreyasRao

  Hi Gibson , How about sn74act245 which are octal bus trancievers with 3 state outputs, which has Vih of 2V at 4.5 to 5.5Vcc .

  • over 9 years ago
  • Logic
  • Logic forum

• RE: Creating IBIS models for older components...

  

  David Larkin

  Hi Ramzi, SN74ACT244 and SN74ACT245 have IBIS models. They are both Octal bus transcievers with 3-state outputs. Can you see if this model is suitable for your simulations? The SN74ABT241 is obsolete, so we won't be able to support that device with a model…

  • over 10 years ago
  • Simulation, hardware & system design tools
  • Simulation, hardware & system design tools forum

Didn't find what you are looking for? Post a new question.