Part Number: SN74LVC8T245 Other Parts Discussed in Thread: SN74AHCT1G08 Hi Team,
My customer is trying to use SN74LVC8T245 and sn74AHCT1G08 in the new project to connected to backplane board directly without protection, they have question that if SN74LVC8T245…
Part Number: SN74AHCT1G08 We will use SN74AHCT1G08 single 2-Input Positive-AND Gate. In our system, input voltage is maximum 3.3V . In a datasheet, the Recommended Operating condition for VIH(min)=2V & VIL(Max)=0.8V.
I would like to know the DC electrical…
Part Number: SN74AHCT1G08 Hi,
In one of My customer's design, the output of 1G08 has to be pulled up to 12V continuously through a resistor. The device is powered from 5V, So the clamp current will be limited to arround 14mA, well below the absolute maximum…
Other Parts Discussed in Thread: SN74AHCT1G08 Website parametric search and webpage http://www.ti.com/product/sn74ahct1g08 show minimum operating voltage of 2V when datasheet and feature section of part webpage show operating voltage range of 4.5 -5.5V…
AHCT devices support up to 170 Mbps.
If you need just a buffer (and not an AND gate), consider the SN74AHCT125 (or SN74LV125AT for higher drive strength). If you need fewer channels, consider the SN74AHCT1G08 or SN74AHCT1G125.
Part Number: TPS60400-Q1 Other Parts Discussed in Thread: TPS60400 , TPS60140 , REG710-33 , SN74AHCT1G08 We would like to make a 3.3V-5V power supply by boosting from the LDO output power supply of about 2.5V, 40mA. I would like to use Charge Pump Power IC…
Part Number: CD74HCT374 Other Parts Discussed in Thread: SN74AHCT1G08 , CD74ACT273 , , CY54FCT273T Dear all,
Please provide the longetity (availability of the product) , Temperature, speed, Density , pins and type of use(serial or Parallel) of below product…
