Part Number: SN74AHCT244 I'm reposting this from email for Jerry, an FAE.
-
Currently his customer is using SN74AHCT244DWR for their design. And they have some confusion about this device and may need your help.
In the datasheet ROC table, we mentioned…
Part Number: SN74AHCT244 Hi team,
My customer is utilizing SN74AHCT244, and for this device, 1pin and 19pin are output enable with active low.
They want to know if we have active high version. Can you help advise? Thanks!
Regards,
Xiaoying
Part Number: SN74AHCT244 Dear Team,
Input Transition rise and fall rate (Δt/Δv) of SN74AHCT244 isn't listed in the datasheet.
Figure 3. in the Application Note (Implications of Slow or Floating CMOS Inputs) lists the Δt/Δv of the AHCT series.
…
Part Number: SN74AHCT244 part number SN74AHCT244MDWREP
Question 3,4,5,6 refer to a qual doc I have but I can get it uploaded in here. perhaps contact me and I can get the qual doc to you.
1. Was a c-SAM performed
2. Was a DPA performed
3. During…
Part Number: SN74AHCT244 Dear Team,
My customer is considering replacing from 74VHCT244FT (TOSHIBA).
The VOL(P) and VOL(V) values are listed in the 74VHCT244FT but not in SN74AHCT244.
Please let me know if you have a reference value.
Best regard…
Part Number: SN74AHCT244-EP What datasheet parameters are tested as part of production test? Which datasheet parameters are guaranteed by other methods?
Part Number: SN74AHCT244 Hello,
I've designed a BeagleBoneBlack cape wich send signals that controls some multiplexers. On the multiplexing board input there is a SN74AHCT244 to convert the 3.3V BBBs GPIO voltage to 5V. But, whenever the two boards…
Part Number: SN74AHCT244-EP the datasheet for SN74AHCT244DW shows thermal resistance as 83 C/W for DW package 20 pin in table 7.4. the datasheet in SN74AHCT244MDWREP shows thermo resistance as 58 C/W for DM package.
I would think they would be the same…
