Part Number: SN74AHCT244 Other Parts Discussed in Thread: SN74HCT244 Hi team,
Do you have any OCTAL BUFFER/DRIVER that is fully pin to pin with the SN74AHCT244PWR with lower drive capability?
The customer is looking for such a device to reduce overshoot…
Part Number: SN74AHCT244 Hi,
When the device is disabled and Vcc=5V condition, 0.54 V is applied to the output pin (1Y1~1Y4,2Y1~2Y4). Is this a problem? Customer is concerned that the device will be destroyed by pre-biasing the output pins when disabled…
Part Number: SN74AHCT244-Q1 Other Parts Discussed in Thread: SN74HCS14-Q1 , SN74LV8151 Hello,
We require the part having all features as this buffer - SN74AHCT244QPWRQ1.
One extra feature need is it should have Schmitt trigger inputs.
Specifications required…
Part Number: SN74AHCT244 Hi Team,
Let me confirm just in case
Is it OK for SN74AHCT244 to apply high logic signal(3.3V) to inputs pins during no supply condition?
In my understanding, 3.3V is under its Abs and recommendation range so SN74AHCT244 can withstand…
Part Number: SN74AHCT244 Hello,
I have a question for SN74AHCT244 output current for capacitive load.
The datasheet(SCLS228M) defines absolute max of “Continuous output current, Vo<0 or Vo>Vcc)” as +-25mA. But in my customer’s system…
Part Number: SN74AHCT244 Other Parts Discussed in Thread: CD74HCT244 Regarding SN74AHCT244PW, I'm looking for a value for Tj-max.
Per the datasheet, the part has a listed max operating temperature of +85C (packaging information table) and internal…
Part Number: SN74AHCT244 Other Parts Discussed in Thread: , CD74HCT244 Hi,
I have a question about temperature in SN74AHCT244 datasheet.
The temperature range is from -40 to 125. But at the bottom of the specification, it writes -40 to 85 degrees centigrade…
Part Number: SN74AHCT244 We are trying to figure out if it would be acceptable to drive a MOSFET at a frequency of 20kHz using one of the output of a 74AHC244. We have captured the current waveforms during turn-on and turn-off, waveforms attached.
…
These buffers are OK for the signals output by the ADC (Dxx and /BUSY).
For /CS, R/C, BYTE, you need to translate up. If you want a single chip for all four ADC control signals, the TXU0304 would match; if you have more signals, separate SN74LVC244A and…
Part Number: SN74AHCT244Q Other Parts Discussed in Thread: SN74AHCT244 , SN74AHCT244-Q1 What is the difference in performance between the SN74AHCT244 and the SN74AHCT244Q? When I checked the datasheet, SN74AHCT244Q says "Q devices meet automatic performance…