Part Number: SN74AHCT541 Tool/software: Hello team,
i am using IBIS model of
SN74AHCT541PW
as this part is TTL compatible the IBIS quality specification states that the for TTL devices Temp(minimum) less than Temp(Maximum) but for given part in…
Part Number: SN74AHCT541 Hello TI team,
I have a question about the part SN74AHCT541DW.
while i refer the datasheet :
The 3-state control gate is a 2-input AND gate with active-low inputs so that if either output-enable (OE1 or OE2) input is high, all…
Part Number: SN74AHCT541 Dear team,
My customer is using SN74AHCT541 as buffer to PWM signal. When designing STO function, they use a voltage monitoring to measure VCC of SN74AHCT541 when it drops to the minimal normal working voltage and considering it…
Part Number: SN74AHCT541 Hi team,
I want to know what is the test condition for high-level output current of SN74AHCT541?
And what is the difference between high level current and output clamp curren Iok?
BR,
Steven
Part Number: SN74AHCT541 Other Parts Discussed in Thread: SN74HCT541 , CD74HCT541 , CD74ACT541 , SN74LV541AT Hello.
I want to replace SN74AHCT541 with SN74LVC541APW.
VCC is 5V.
The data sheet states that the recommended voltage is up to 3.6V.
Is it okay…
Part Number: SN74AHCT541 Other Parts Discussed in Thread: SN74AHC541-Q1 Hello, do we have an automotive Q1 version?
Customer is looking for a direct replacement of
IC OCTAL BUFFER/LINE DRIVER 3-S 74AHCT541PW-Q100 NEXPERIA B.V
Regards, Holger
Part Number: SN74AHCT541 Hello,
I see that Figure 5 on the datasheet shows 270mA @50MHz 3.3V operation. ((270e-3/8)/50e6)/3.3 = 204pF per channel. Why is the current in that figure this high? I see in section 7.9 the power dissipation capacitance per buffer…
Part Number: SN74AHCT541 Hi Guys
could you help review our schematic below? A1-A8 are digital signal from MCU. These are PWM signal. The Y1-Y8 are PWM output to IPM driver signal. three pahse full bridge IPM.
During the test, we found that when the high…
Part Number: SN74AHCT541 Hi Team,
I have a question about SN74AHCT541.
Does the SN74AHCT541 have an input tolerant function? It becomes a function like the following Toshiba products. toshiba.semicon-storage.com/.../logic_common_03.html
The customer is…