Search tips
Showing 11 results View by: Thread Post Sort by

  • SN74AUP1T08: Can they use SN74AUP1G08 instead?

    Part Number: SN74AUP1T08 Other Parts Discussed in Thread: SN74AUP1G08 , Hi, Good day. Our customer is using the SN74AUP1T08 in their design however they are having supply issue and hey want to know if they can use the SN74AUP1G08 instead. Would that be fine…
    • Answered

  • SN74AUP1T08: Help with output oscillating on Schmitt Trigger AND

    Resolved
    Part Number: SN74AUP1T08 Other Parts Discussed in Thread: SN74AUP1G97 Hello, I have a Schmitt Trigger AND gate I am using for timing at reset. The inputs to the AND gate are one digital, and one RC timing circuit. I am not measuring much noise on the RC…
    • Resolved
    • Answered

  • SN74AUP1T08: ψJ-T, Tj Max, θJ-C

    Resolved
    Part Number: SN74AUP1T08 Hi Sirs, Sorry to bother you. As title, We have two parts need confirm ψJ-T, Tj Max, θJ-C I couldn't find this spec on datasheet, could you help it? Parts number is SN74AUP1T08DCKR and SN74LV1T125DCKR Thanks!!
    • Resolved
    • Answered

  • SN74AUP1G08: Differences between SN74AUP1G08 and SN74AUP1T08

    Resolved
    Part Number: SN74AUP1G08 Other Parts Discussed in Thread: SN74AUP1T08 What are the differences between the SN74AUP1 G 08 and SN74AUP1 T 08? According to their respective datasheets, both devices appear to be interchangeable. However, the input voltage requirements…
    • Resolved

  • RE: SN74LVC1G08: Is it capable of up-voltage translation?

    Hi, Your reasoning is correct. Based on VIH(min) = 2.0V for the SN74LVC1G08 at Vcc = 3.3V, it should be able effectively up-translate from a 2.5V device to 3.3V assuming the VOH of the 2.5V device exceeds VIH(min) = 2.0V. I also recommend checking out…
    • Answered

  • RE: SN74LVC2G08: Looking for AND Gate which accepts VCC=3.3V and VIH=1.8V

    Resolved
    The SN74AUP1T08 and SN74LV1T08 can do this. There is no two-gate device.
    • Answered

  • RE: SN74LVC1G08: AND gate Vcc 3.3V Vih<1.6V

    Resolved
    SN74LV1T08 or SN74AUP1T08.

  • RE: SN74LVC2G17: AND gate with 1.6V VIH and Open drain output.

    At 3.3 V, the V IH of the SN74LVC2G17 is 2.0 V. You need to use the SN74AUP1T08, and add a separate open-drain buffer like the SN74LVC1G07.

  • RE: SN74LVC08A: SN74LVC08A --misoperation --when Vin=1.5V

    Voltages between V IL (0.8 V) and V IH (2 V) are invalid, and might damage the device (see [FAQ] How does a slow or floating input affect a CMOS device? ). If 1.5 V should be interpreted as high, you need a level shifter, or an AND gate with lower input…
    • Answered

  • Looking for single/dual non-inverting buffer

    Resolved
    Other Parts Discussed in Thread: SN74AUP1T08 , SN74AUP1T57 , SN74LV1T08 , TXS0101 , TXS0102-Q1 hi, Pls help suggest a single/dual non-inverting buffer as below spec VCC:3.3V input: Vih>1.35V, Vil<0.45V output: Voh>2V, Vol<0.8V

Didn't find what you are looking for? Post a new question.