• SN74AUP2G17: What is maximum frequency SN74AUP2G17 works?

  

  venkatesh ponduri

  TI Thinks Resolved

  Part Number: SN74AUP2G17 Other Parts Discussed in Thread: SN74AUP2G79 Hi TI Team, I am using SN74AUP2G17 in my design to drive 10MHz signal. What is maximum frequency SN74AUP2G17 will work. Will rise time and fall time effect for my application i…

  • over 1 year ago
  • Logic
  • Logic forum

• SN74AUP2G17: Skew between SN74AUP2G17 channels

  

  Dung Huynh

  TI Thinks Resolved

  Part Number: SN74AUP2G17 I have a question about SN74AUP2G17. There is a delay time shown in the data sheet, but is there a difference in the timing between 1Y and 2Y outputs? I'd like to know the skew between channels 1Y and 2Y. Thank you.

  • over 2 years ago
  • Logic
  • Logic forum

• SN74AUP2G17: SN74AUP2G17DSFR

  

  Scott Morrill

  TI Thinks Resolved

  Part Number: SN74AUP2G17 I would like a FIT number for the likely hood that PIN 1 and PIN 6 would fail internally short together. I'm using the SN74AUP2G17DSFR part number.

  • over 1 year ago
  • Logic
  • Logic forum

• SN74AUP2G17: Over Voltage at Input and Short Circuit at Output side for the Overall system

  

  Srinadh Moka

  TI Thinks Resolved

  Part Number: SN74AUP2G17 Other Parts Discussed in Thread: THS3491 , TLV1871 Tool/software: Hi, We are developing a ground based receiver with different inputs and the outputs. Can you suggest the protection circuit/IC which is support for the over voltage…

  • 9 months ago
  • Logic
  • Logic forum
Answered

• SN74AUP2G17: Ioff Details on SN74AUP2G17

  

  Dave Young

  Resolved

  Part Number: SN74AUP2G17 Hello- I've been looking at the SN74AUP2G17 for an application which may drive the input lines to 1.8V while VCC is at 0V. This application requires the part will not back-drive the VCC pin or the output pin from the input pin…

  • Resolved

  • over 3 years ago
  • Logic
  • Logic forum
Answered

• SN74AUP2G17: I would like to ask, when this chip(SN74AUP2G17) is in use, if one channel is not in use, how to configure the output properly

  

  Bao Songhao

  Resolved

  Part Number: SN74AUP2G17 I would like to ask, when this chip is in use, if one channel is not in use, how to configure the output properly

  • Resolved

  • over 3 years ago
  • Logic
  • Logic forum
Answered

• SN74AUP2G17: SN74AUP2G17

  

  ami molcho

  Resolved

  Part Number: SN74AUP2G17 Other Parts Discussed in Thread: SN74AUC1G17 Hi Is this part suitable to drive 25Mhz clock at 1.5V? Best Regards Ami

  • Resolved

  • over 5 years ago
  • Logic
  • Logic forum

• SN74AUP2G17: Searching TI solution

  

  Kygo Cheng

  TI Thinks Resolved

  Part Number: SN74AUP2G17 Hi Team, There is a good new that we DIN SN74LVC2G17QDCKRQ1 But cause SN74LVC2G17QDCKRQ1 is out of stock! Customer ask the replacement of SN74LVC2G17QDCKRQ1, is SN74AUP2G17 a good solution? Please help suggest TI solution…

  • over 3 years ago
  • Logic
  • Logic forum

• SN74AUP2G17: Absolute rating of input spec on SN74AUP2G17

  

  BTjandra

  TI Thinks Resolved

  Part Number: SN74AUP2G17 Hello, I happen to have a board when a CPU drives "high to low" to SN74AUP2G17 input pins (1A and 2A), it creates under voltage for about ~-(600-700)mV for ~5ns. Which is beyond the absolute rating -500mV. But I also notice…

  • over 5 years ago
  • Logic
  • Logic forum

• SN74AUP2G17: SN74AUP2G17* IBIS MODEL

  

  eli

  TI Thinks Resolved

  Part Number: SN74AUP2G17 Other Parts Discussed in Thread: SN74AUP1G17 Can you help find SN74AUP2G17 ibis model

  • over 8 years ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.