Answered

• SN74AUP3G17: Can be used a level shifter from 3.3V to 1.8V LVCMOS?

  

  Kazuhiko Hirano

  Resolved

  Part Number: SN74AUP3G17 Tool/software: Hello, Looking at the RECOMMENDED OPERATING CONDITIONS spec, Vi can be up to 3.6V regardless of Vcc voltage. So, 1A, 2A and 3A inputs are Over-Voltage Tolerant Inputs. So, m y customer would like to use SN74AUP3G17…

  • Resolved

  • 2 months ago
  • Logic
  • Logic forum

• SN74AUP3G17: SN74AUP3G17(SCHMITT-TRIGGER BUFFER) Output Rise/Fall Time

  

  Vincent Lin

  TI Thinks Resolved

  Part Number: SN74AUP3G17 Other Parts Discussed in Thread: SN74AUP1G125 , SN74AUP1G32 Dear Sirs: Regarding the SN74AUP3G17(SCHMITT-TRIGGER BUFFER) Output Rise/Fall Time. 1. SN74AUP3G17(SCHMITT-TRIGGER BUFFER) VCC is 3V. Please provide us with theSN74AUP3G17…

  • over 3 years ago
  • Logic
  • Logic forum

• SN74AUP3G17: Simulation Model request

  

  Mark Chen52

  TI Thinks Resolved

  Part Number: SN74AUP3G17 Other Parts Discussed in Thread: TINA-TI Hi Expert, Do we have Hspice simulation model for this device? Regards, Mark

  • over 3 years ago
  • Logic
  • Logic forum

• SN74AUP3G17: Ibis model for SN74AUP3G17?

  

  Samantha Muzzey

  TI Thinks Resolved

  Part Number: SN74AUP3G17 Other Parts Discussed in Thread: SN74AUP1G17 Hello, I was just wondering if there was an ibis model available for this part?

  • over 5 years ago
  • Logic
  • Logic forum
Answered

• SN74AUP3G17: RSE PACKAGE foot print

  

  Noriyuki Takahashi

  Resolved

  Part Number: SN74AUP3G17 Hi team, Is the direction of I/O pin for RSE PACKAGE opposite with the DCU and DQE packages? Please let me confirm this just in case, because I found the post as below. https://e2e.ti.com/support/logic-group/logic/f/logic…

  • Resolved

  • over 3 years ago
  • Logic
  • Logic forum
Answered

• SN74AUP3G17: Ioff Voltage Threshold

  

  Joseph Varikooty

  Resolved

  Part Number: SN74AUP3G17 Had a question about the SN74AUP3G17 regarding the "Ioff Supports Partial-Power-Down Mode Operation" voltage threshold. At what voltage do the inputs and outputs stop being High Impedance? For instance, if there's 0.2V on the…

  • Resolved

  • over 4 years ago
  • Logic
  • Logic forum

• RE: Fw: Question on SN74AUP3G17 in RSE(QFN) footprint

  

  Sebastian Muriel

  The datasheet for this device shows the correct pinout for the RSE package.

  • over 3 years ago
  • Logic
  • Logic forum
Answered

• SN74AUP3G17: Operating temp. only 85°C, Do you have 105°C available?

  

  Sean Liao (Yu-Sheng)

  Resolved

  Part Number: SN74AUP3G17 Other Parts Discussed in Thread: SN74LVC3G17 Hi sir, SN74AUP3G17DCUR operating temp. only 85°C, Do we have 105°C available device? Pls kindly suggest the P/N if we have 105degC version. Thanks a lot!

  • Resolved

  • over 4 years ago
  • Logic
  • Logic forum
Answered

• SN74AUP3G17: MDC/MDIO clause 45

  

  Kuan Wei Chen (Kevin Chen)

  Resolved

  Part Number: SN74AUP3G17 Dear Team, My customer is looking for TRIPLE SCHMITT TRIGGER INVERTER and input/output with 1.2V for MDC/MDIO clause 45. The speed need to higher than 20MHz. Is there any concern to use this one? http://www.ti.com/lit…

  • Resolved

  • over 6 years ago
  • Logic
  • Logic forum
Answered

• SN74AUP3G17: Using these schmitt triggers at cryogenic temperatures; do they contain any BJTs?

  

  6058543

  Resolved

  Part Number: SN74AUP3G17 Hi, My question is as in the subject line. When trying to use these devices at cryogenic temperatures (less than 10mK), they appear to freeze out and not work at all. This suggests to me that this part contains BJTs somewhere…

  • Resolved

  • over 6 years ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.