• SN74AVC2T45: SN74AVC2T45

  

  kamesh L82

  TI Thinks Resolved

  Part Number: SN74AVC2T45 Hello, What is the state of I/O of this device when there is no power for both the supplies VCCA and VCCB. Will the device allow any leakage path? Thanks Kamesh.

  • over 7 years ago
  • Logic
  • Logic forum
Answered

• SN74AVC2T45: A1 and A2 in Figure 15

  

  Shuji Ishiwata

  Resolved

  Part Number: SN74AVC2T45 Hi All, I have a question about SN74AVC2T45. I think the figure in Figure 15. is wrong. I think the positions of the A1 and A2 pins are opposite. The correct terminal is understood below. The connections are A1 and B1, which…

  • Resolved

  • over 5 years ago
  • Logic
  • Logic forum
Answered

• SN74AVC2T45: Single Input Single Output

  

  Asaf Samira

  Resolved

  Part Number: SN74AVC2T45 Other Parts Discussed in Thread: SN74AXC1T45 Hi, I want to use the component in the following configuration: B1 - Input A1 - Output DIR - GND What should I do with the unused pins? (A2 & B2) Thanks, Asaf

  • Resolved

  • over 5 years ago
  • Logic
  • Logic forum

• SN74AVC2T45: Output Jitter spec

  

  K.Shidara

  TI Thinks Resolved

  Part Number: SN74AVC2T45 Other Parts Discussed in Thread: SN74AXC1T45 Hi Team, Would you advise what is the output jitter spec? The usage is to apply 1.8V for both VCCA and VCCB, I am trying to pass the 12MHz clock from the transmitter through the level…

  • over 6 years ago
  • Logic
  • Logic forum

• SN74AVC2T45: VCC under 1.2V

  

  Cedrick

  TI Thinks Resolved

  Part Number: SN74AVC2T45 Other Parts Discussed in Thread: SN74AXC2T45 Hi, Greetings! Our customer has a design around SN74AVC2T45 that is translating from 1.2V IO to 3.3V IO and they noticed something in the datasheet that concerned them. The datasheet…

  • over 6 years ago
  • Logic
  • Logic forum

• SN74AVC2T45: Can it be used for bus (e.g. SPI, MDIO, rate 4-20m) level conversion?

  

  xiaofu wen

  TI Thinks Resolved

  Part Number: SN74AVC2T45 Other Parts Discussed in Thread: SN74AXC2T45 , SN74AXC4T774 , TXS0102 Can it be used for bus (e.g. SPI, MDIO, rate 4-20m) level conversion?

  • over 5 years ago
  • Logic
  • Logic forum

• SN74AVC2T45: 74AVC2T45 Rise /fall time

  

  Dilip Namdeo Mohol

  TI Thinks Resolved

  Part Number: SN74AVC2T45 Other Parts Discussed in Thread: SN74AUP2G17 One of my customer is using 74AVC2T45 for level converting 3.3V signal to 1.8V. The Rise and Fall time of the Input Signal is about 18mS. Can you please let me know if this device…

  • over 6 years ago
  • Logic
  • Logic forum

• SN74AVC2T45: 74AVC2T45

  

  kamesh L82

  TI Thinks Resolved

  Part Number: SN74AVC2T45 Other Parts Discussed in Thread: SN74AXC4T245 , SN74AXC1T45 Hello, I have a query on the SN74AVC2t45 device. I understand from datasheet that when no vcca or vccb or both the I/o are in high impedance. I am seeing a different…

  • over 7 years ago
  • Logic
  • Logic forum

• SN74AVC2T45: Connect DIR pin

  

  Charles Jeon

  TI Thinks Resolved

  Part Number: SN74AVC2T45 Hi team Can I directly connect the DIR pin of the SN74AVC2T45DCTR to the MCU port? Thank you.

  • over 7 years ago
  • Logic
  • Logic forum

• SN74AVC2T45: externally Configurable RS232 , RS422 schematic

  

  kalyan

  TI Thinks Resolved

  Part Number: SN74AVC2T45 Hello, I have a requirement to design an externally configurable rs232/rs422 schematic. Can i choose the component "SN74AVC2T45", for the above requirement. I have an idea like: By using two "SN74AVC2T45" devices, one…

  • over 6 years ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.