Part Number: SN74AVC32T245 Hi,
We have TI PN: SN74AVC32T245GKER with following top marking:
WY245
15J
A2RE
We need to identify date code from top marking for urgent shipping of parts. Do you have document for date code decoder from top marking?
Thanks…
Part Number: SN74AVC32T245 Hey team,
What parts would we recommend for high density voltage translators? A customer is trying to translate 100-130 signals so would prefer >8 bit solutions.
They are translating from 1.1V to 3.3V and would be translating…
Part Number: SN74AVC32T245 Other Parts Discussed in Thread: SN74AVC16T245 I'm getting a lot of troubles to buy that chip and no new stock will be available until march 2023.
Is there any technical reason for such shortage?
Is it going to be obsolete…
Part Number: SN74AVC32T245 Hi ,
1. as below, Are SN74AVC32T245ZKE and SN74AVC32T245NMJ compatible with each other ?
2. SN74AVC32T245NMJ , if input no use , it should connect to GND, then how to be connected the output , the floating ?
Part Number: SN74AVC32T245 Hi,
Due to market issues, I'm having to look far and wide for stock of SN74AVC32T245ZKER
Using https://www.ti.com/packaging/docs/partlookup.tsp#divline
SN74AVC32T245ZKER doesn't work anymore but the datasheet I have says…
Part Number: SN74AVC32T245 Hi team,
Could you recommend the p2p replacement of SN74AVC32T245ZKER and SN74AVC32T245NMJR?
My customers found below devices, are they drop-in replacement?
Part Number: SN74AVC32T245 I’m currently working on some signal integrity analysis for a spin of a PCBA, and we are using the TI SN74AVC32T245NMJR level-translator on our board (three of them actually).
During some post-route sims I noticed some…
Part Number: SN74AVC32T245 Other Parts Discussed in Thread: SN74AVC16T245 Hi, I would like to complete my design with TI's level shifter ICs, such as SN74AVC16T245 or SN74AVC32T245. In the datasheet, it says the IC supports maximum data rates at 380Mbps…
Part Number: SN74AVC32T245 Other Parts Discussed in Thread: SN74AXC8T245 Hello,
Is it possible to use the SN74AVC32T245 with VCCa=1.2V?
The 1.2V in my card has 5% tolerance, Is it OK?
The datasheet doesn't mention the VCC tolerance when it's 1.2V.…