Part Number: SN74AVC8T245 Other Parts Discussed in Thread: TXV0108 Tool/software: Hi team,
My customer plans to use SN74AVC8T245 for the level translation of 1.5V<->1.8V and 1.8V<->1.5V. Output channel-to-channel skew of them are not stated on the datasheet…
Part Number: SN74AVC8T245 Tool/software: Hi All,
I have a question about the SN74AVC8T245.
Is the SN74AVC8T245 possible of RGMII level shift from 1.8V to 3.3V and 3.3V to 1.8?
Best Regards, Ishiwata
Part Number: SN74AVC8T245 Other Parts Discussed in Thread: SN74AXC8T245 Hi,
I am plan to use SN74AVC8T245 to translate USB signal by ULPI interface which the data rate is 60Mbps per channel.
The usb signal is bi-directional, so I want to know how long…
Part Number: SN74AVC8T245 Dear, Support Team. Datasheet changes from Revision J (March 2017) to Revision K (November 2023) and Updated the Thermal Information table for all packages. Junction-to-top characterization parameter "ψJT" of 24Pin PW package has…
Part Number: SN74AVC8T245 Other Parts Discussed in Thread: SN74AXC8T245 This is a continuation of the question below.
e2e.ti.com/.../sn74avc8t245-sn74avc8t245-power-up-procedure
Please answer any additional questions.
I am looking at the text in chapter…
Part Number: SN74AVC8T245 Other Parts Discussed in Thread: SN74AXC8T245 What is the procedure for powering up and shutting down the SN74AVC8T245?
Could you please let me know if there are power-on and power-off rules for Vcca and Vccb?
If there are any…
Part Number: SN74AVC8T245 Hi,
As far as the document below is concerned, it seems that the SN74AVC8T245 can be used to convert the signal level of RGMII.
https://www.ti.com/lit/ml/scea118/scea118.pdf
I am currently considering connecting 1.8V from different…
Part Number: SN74AVC8T245-Q1 We purchased more than 5,000 chips in May,2023 from mouser, and C-mode Scanning Acoustic Microscope revealed that most of the devices had internal delamination.May I ask what is the reason for this?Whether it is a product…
Part Number: SN74AVC8T245
Hello,
SN74AVC8T245DGVR output measurement found that the signal has serious overshoot and undershoot.
There are two cases, one is through the 6.2K resistor to another receiving chip, the measurement at the right end of…
Part Number: SN74AVC8T245-Q1 To whom it may concern -
In the datasheet, it states that "To ensure the high-impedance state of the outputs during power up or power down, the OE input pin must be tied to VCCA through a pullup resistor and must not be…