Answered

• RE: SN74AVCBH164245: IBHLO spec for 3.3V supply

  

  Ella KIM

  Resolved

  Do we have any p2p device to SN74AVCBH164245, but without bus-hold inputs?

  • over 2 years ago
  • Logic
  • Logic forum
Answered

• SN74AVCBH164245: What is difference between SN74AVCB164245GR and SN74AVCBH164245GR?

  

  Carl Wolfe

  Resolved

  Part Number: SN74AVCBH164245 What does the "H" stand for? It appears the difference between these parts is the H version has Active bus-hold circuitry that is provided to hold unused or floating data inputs at a valid logic level. Use of pullup…

  • Resolved

  • over 2 years ago
  • Logic
  • Logic forum
Answered

• SN74AVCBH164245: IO specification for one channel or for all channels?

  

  Ella KIM

  Resolved

  Part Number: SN74AVCBH164245 Hello, I'm wondering if the IO and IOK in absolute maximum rating table are for one channel or for all sixteen channels. Can you help clarify? I believe IOH and IOL specification are valid per channel. Is my understanding…

  • Resolved

  • over 2 years ago
  • Logic
  • Logic forum
Answered

• SN74AVCBH164245: Power consumption estimation

  

  MINKYUNG KIM

  Resolved

  Part Number: SN74AVCBH164245 Other Parts Discussed in Thread: SN74AVC4T245 Hi team, I need to provide guidance on calculating power consumption of SN74AVCBH164245. I found a thread below. https://e2e.ti.com/support/logic/f/151/t/875721 It doesn't look…

  • Resolved

  • over 4 years ago
  • Logic
  • Logic forum
Answered

• SN74AVCBH164245: When only one side VCC is turn off

  

  MINKYUNG KIM

  Resolved

  Part Number: SN74AVCBH164245 Hi team, The device has an occasion that only VCCB is occasionally turned off from their application while VCCA turn-on. Would you let me know this can lead to any damage or misoperation? Thank you!

  • Resolved

  • over 4 years ago
  • Logic
  • Logic forum

• SN74AVCBH164245: External pull-up resistor on bus line

  

  Alice57

  TI Thinks Resolved

  Part Number: SN74AVCBH164245 Other Parts Discussed in Thread: SN74AVCB164245 Hello Team, Though this device is not recommend to use of pull-up or pull-down resistors with bus line, customer's design specification is required pull-up resistor on input bus…

  • over 6 years ago
  • Logic
  • Logic forum

• SN74AVCBH164245: SN74AVCBH164245 BUS HOLD Feature Question

  

  Jade Goo

  TI Thinks Resolved

  Part Number: SN74AVCBH164245 Hi Team, In SN74AVCBH16245 datasheet page1, "Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended…

  • over 7 years ago
  • Logic
  • Logic forum
Answered

• SN74AVCBH164245: Maximum support data rate

  

  Jade Goo

  Resolved

  Part Number: SN74AVCBH164245 Hi Team, Would you let me know SN74AVCBH164245 maximum support data rate when 1.8V => 3.3V / 3.3V => 1.8V? In datasheet, SWITCHING CHARACTERISTICS maximum around 5ns. Does it mean support 200Mbps? Thank you. Best Regards…

  • Resolved

  • over 7 years ago
  • Logic
  • Logic forum

• SN74AVC4T234: 26-Ω series resistor on A-side outputs of SN74AVC4T234

  

  Dung Huynh

  TI Thinks Resolved

  Part Number: SN74AVC4T234 Other Parts Discussed in Thread: SN74AVCBH164245 Hi, Does SN74AVC4T234 have 26-Ω series resistor on A-side outputs as stated in the Features section of the datasheet? The simulation result with 10 in trace length, 50 MHz…

  • over 2 years ago
  • Logic
  • Logic forum
Answered

• RE: SN74AVC16T245: 1.2V to 3.3V translation

  

  Clemens Ladisch

  Resolved

  SN74AVCA164245 SN74AVCAH164245 SN74AVCB164245 SN74AVCBH164245 These are older devices, with control inputs referenced to A or B, without or with bus hold. SN74AVC16T245 SN74AVCH16T245 These are more modern device with higher speed and lower price, with control…

  • over 2 years ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.