Part Number: SN74AVCH16T245 We plan to use SN74AVCH16T245 as Buffer as one of our design
From data sheet mention 1.8V to 3.3V operation as 380 Mbps.
Please confirm, SN74AVCH16T245 supports 3.3V to 3.3V conversion operation with Data rate 250 Mbps…
Part Number: SN74AVCH16T245 Hi,
We are using SN74AVCH16T245 for the bidirectional translation between 1.2V signals (A side) and 2.5V signals (B side). A pull up resistor of 10Kohm has been used to tie OE to VCCA, which is 1.2V, with a control enabling…
Part Number: SN74AVCH16T245 Dear all
As below picture,it said there is high Impedance, Could you tell me How many values of the Ports input Impedance ? Thanks a lot.
Part Number: SN74AVCH16T245 Other Parts Discussed in Thread: SN74AXC8T245
Hi,
Im using the part "SN74AVCH16T245" for level translation of 16signals, which need to 1.2V to 1.8V level shifting. In that there is SPI SCK, SPI MOSI, and 14 GPO pins are…
Other Parts Discussed in Thread: SN74AVCH16T245 , SN74AVCH8T245 Hi,
I have some unused inputs on both sn74avch16t245 and sn74avch8t245. can I connect them to ground? will it cause unwanted current drawn?
It is mentioned in the sn74avch16t245 datasheet…
Haci,
As long as both VCCA and VCCB are above 1.80V, each input/output pin on the SN74AVCH16T245 can support transmission of up to 380 Mbps simulataneously. Total throughput would be (380 Mbps/channel * 16 channels) = 6.080 Gbps.
With your settings…
Part Number: SN74AVC16T245 Other Parts Discussed in Thread: SN74AVCA164245 , SN74AVCAH164245 , SN74AVCB164245 , SN74AVCBH164245 , SN74AVCH16T245
Hello Team,
My customer is looking for level shifter with requirements below.
- more than 8 channels…
Part Number: SN74AXCH8T245 Other Parts Discussed in Thread: SN74AVCH16T245 , Dear Team,
Is it possible to tie the OE directly to GND without power sequencing ?
Is it also correct for the sn74avch16t245 ?
Regards,
Nir
Hello Luck Wu, Please refer to the datasheet of the SN74AVCH16T245. If you scroll to page 26 you will see the package drawing for the DGV package. The drawing only includes 24 of the pins but it gives you the measurements you might need.
The difference…
Vilas,
I checked the SN74AVCH16T245 IBIS model to confirm the 1.8V model existing on the IO ports.
www.ti.com/.../litabsmultiplefilelist.tsp
The AXC8T245 is the newly released device and model which will support down to 0.65V, so a lower voltage…
