Part Number: SN74AVCH1T45 Tool/software: Hi,
I have a question about the output termination of SN74AVCH1T45, my input signal is a 3.3V 100MHz LVCMOS and i want to translate it to 1.8V LVCMOS, however i don't find the output impedance of the chip in…
Part Number: SN74AVCH1T45 Tool/software: Hi Team,
May I know what is the difference between
Voltage applied to any output in the high-impedance or power-off state
and
Voltage applied to any output in the high or low state?
Part Number: SN74AVCH1T45 Other Parts Discussed in Thread: SN74AVC1T45 , SN74AUC1G17 , 2N7001T , SN74AUP1G17 , SN74AUP1T34 , TXU0101 , SN74LVC1G17 I am planning to use SN74AVC1T45 and SN74AVCH1T45 to level shift 25MHz clocks. An example circuit in our…
Part Number: SN74AVCH1T45 Dear team,
My question is related to the 2 electrical specifications IBHLO and IBHHO, mentioned in the datasheet.
It states: That an external driver must source/sink IBHLO/IBHHO to switch this node from low to high or high…
Part Number: SN74AVCH1T45 Other Parts Discussed in Thread: SN74AVC1T45 Hello,
I don't want to scan the datasheets side by side. The only difference I could find so far is related to the level shifting (as stated in the document header). But both documents…
Part Number: SN74AVCH1T45 Other Parts Discussed in Thread: SN74AXC1T45 , SN74AXCH1T45 Hi, team,
My customer is using SN74AVCH1T45, schematic as below.
But they noticed that there was unexpected pulse at A port output at the time when AVCC 3.3V is…
Part Number: SN74AVCH1T45 Can someone verify the pin assignment for SN74AVCH1T45 in the YZP package? The data sheet (section 6) lists pin functions via numeric pin numbering (1-6) while the YZP package outline assigns pins as alpha-numeric (A1, A2, B1…
Part Number: SN74AVCH1T45 Hello forum, we need to interface LCD2114 GPIO at 1.8 v to MSP432 GPIO at 2.85 v. Is the above part suitable as higher rail does not fit into the listed voltages.
Part Number: SN74AVCH1T45 Hi all guys,
I'm trying to figure out what is the correct pinout related to this part number in the DSBGA6 package.
From the datasheet (SCES598E – JULY 2004 – REVISED MARCH 2016) page 3 the pin numbers are 1,2,3,4,5,6 but…
