Part Number: SN74CB3Q16210 Tool/software: I just find this part is used as a backplane I2C signal switch in a design. I'm really confused about it. Can this part support I2C which is an OC/OD Bi-direction signal?
In some cases, especially point to point…
Part Number: SN74CB3Q16210SN74CB3Q16210DGVR is hot swappable. Could you please advise?
Device currently in use is QS34XVH245Q3G8 from Renesas.
I don’t see anything about this on the product page. Let me know if Iany additional information is needed…
Part Number: SN74CB3Q16210 1.What is the criteria to select a pull up resister for 'OE' Signal pin , is it open drain type ?, is there any documentation for it
2. what is Vik given in data sheet
Sumathi,
The recommended operating conditions state the Vcc voltage must be between 2.3 V and 3.6 V. When there is a valid Vcc present you may pass any voltage from 0V to 5.5 V through the signal switch.
Also note that the Vih level to toggle the digital…
Part Number: SN74CBT16210C Other Parts Discussed in Thread: SN74CB3Q16210 The datasheet mentioned "supply voltage range is -0.5 ~ +7V", is it possible to connect the VCC=3.3?
Rail-to-rail input voltage swing will include 0-5V, and 0-3.3V. What…
Hi Zhao,
The EMIF16 interface on the C6678 uses 1.8V LVCMOS IOs. They are not 3.3V tolerant and connecting them directly to 3.3V IOs on your FPGA could damage the IO buffers. You will have to use a level converter to connect to your FPGA interface. We…
