Part Number: SN74CB3T16211 Tool/software: SN74CB3T16211 data sheet does not include IOH/IOL values. Since this IC is a switch, does it depend on the drive capability of the IC1?
Part Number: SN74CB3T16211 Hi team,
My customer has some questions about this deivice. In the datasheet, it says as below:
The I/O port of this device has a pullup current source that maintains the output voltage at VCC when the device
is ON, and…
Part Number: SN74CB3T16211 Hi Team,
One quick question.
Is this device supporting bi-direction level shift?
Customer currently using it for PCI level shift and it seems working, this interface should be bi-directional, and wonder if this device…
Part Number: SN74CB3T16211 Hello,
I'm designing a board that will be using 74cb3t16211's as level shifters and pin multiplexers to interface to plug-in modules. In some situations (when a board is not plugged in or where a plug-in board does not use…
Part Number: SN74CB3T16211 Hello.
Please tell me about the case where the undershoot is below -0.5V. Not found on the datasheet.
If the input waveform is -0.5V or less, are there any relaxation conditions according to the time regulation?
For example…
Hello Shimizu,
The behavior you are observing appears to be overshoot. Below I have a very simplified circuit to illustrate the concept. However, this is a simplified model and may not match your setup as I do not know what else is in your customer…
Hi Jason,
It appears you are trying to set up the device as a switch.
The following is a brief instruction on how to properly set up a switch model in Hyperlynx. Please give this a try and let us know how it goes:
****************************…
![[FAE] Andrew Wang](/resized-image/__size/24x24x2/__key/communityserver-components-avatars/00-00-07-45-83/4TN3ECJKFL7N.jpg)
