Part Number: SN74CB3T3125 Other Parts Discussed in Thread: SN74CB3T1G125 , SN74CB3T1G125-Q1 Hi,
Do you have any suggested part that is functionally compatible with SN74CB3T3125(4ch) and only support 1ch?
I’ve found SN74CB3T1G125(1ch) and SN74CB3T1G125…
Part Number: SN74CB3T3125 Other Parts Discussed in Thread: SN74CB3Q3244 Hi Experts
I see that the IBIS model for this part covers D, DGV, PW and DBQ package types.
Is it also relevant for the RGY (VQFN) package type?
If not, is there an updated…
Part Number: SN74CB3T3125 Other Parts Discussed in Thread: SN74LVC2G17 We have encountered a couple of instances where we suspect the A port internal protection circuitry degrades over time when connected to an open-drain signal pulled up to 5V through…
Part Number: SN74CB3T3125 Hi,
Can I use this part for translating bidirectional signals between 2v5 and 3v3? The datasheet only mentions down translation from 3v3 to 2v5.
Thank you.
Takahiro-san,
Question 1.
There is the information of Operating free-air temperature(Ta) in datasheet p.4.
But we want to check the case tenperature(Tc).
Do you know the recommended range of Tc?
Why does the case temperature matter in your…
Part Number: SN74CB3Q3125 Other Parts Discussed in Thread: SN74CB3T3125 , E2E,
Would sn74cb3t3125 be a higher current allowance to sn74cb3q3125 ? What is the difference between the two?
Thank you,
Adam
Part Number: SN74CB3T3125 Hello,
I have a customer who is looking for the Theta_JA thermal coefficient for the RGY package in the datasheet. I see there is a DGY and a PW package specification for Theta JA but not for the RGY package.
Can someone…
Part Number: SN74CB3T3125 Hello.
Please let me know the maximum value of Tj (Junction temperature) of SN74CB3T3125PWR.
Is it 125℃ or 150℃?
It is OK even "Absolute Maximum Ratings" or "Recommended Operating Conditions".
The purpose is to calculate…
Other Parts Discussed in Thread: SN74CB3T3125 , SN74CB3Q3125 I am looking for hot insertion –bus switch similar to sn74cb3t3125, input signals will be 800MHz. Do we have such a device?
Hi,
Customer would like to reduce power consumption. they will use only 2bit I/Os.
How should they deal with unused 2bit I/Os and OE pins ?
In the recommended setting, how could customer reduce power consumption ICCmax=20uA ?
Best Regards,
…
