Search tips
Showing 10 results View by: Thread Post Sort by
    Answered

  • RE: SN74CBT16232: MUX bi-directionality Issue

    Resolved
    Onur, All of the TI passive FET switches are bi-directional. Passive FET switches create a low impedance path from the drain to source when the gate of the FET is biased to turn in on. When gate is biased to turn the FET off it will create a Hi-Z path…

  • CD74HCT4067: We are looking for recommend part to replace Renesas QS3390QG8

    Answer Suggested
    Part Number: CD74HCT4067 Other Parts Discussed in Thread: TS3L301 , TMUX646 , SN74CBT16232 , SN74CBT16292 Hello Sir: We are looking for recommend part to replace Renesas QS3390QG8. https://www.mouser.tw/datasheet/2/698/REN_QS3390_DST_20141013-1999213…

  • Suitable SPDT Switch Solution with low Rdon

    TI Thinks Resolved
    Other Parts Discussed in Thread: SN74CBT16232 , TS5MP646 Dear Team, My customer is looking for a 8 bit or 16 bit SPDT MUX for 400kHz PWM signal. I found SN74CBT16232, but its Rdon (Max) is 12 ohm. My customer hopes that Rdon could less than 5 ohm…

  • TMUX1574: Need recommendation to multiplex between 8 sd cards.

    Answer Suggested
    Part Number: TMUX1574 Other Parts Discussed in Thread: SN74CBTLV3251 , SN74CB3Q3251 , TMUX1308 , TMUX1309 , TMUX1575 , SN74CBT16232 , TMUX646 I can multiplex between 8 sd cards using 4 TMUX1574 but I would like to reduce the number of IC. I want to…

  • RE: SN74CBT16209A: Multiplexing two 16 bit data to one 16 bit bus

    There are 16-channel SPDT switches like the SN74CBT16232.

  • SN74LVC157A: 32/16ch 2:1 mux

    TI Thinks Resolved
    Part Number: SN74LVC157A Other Parts Discussed in Thread: SN74CBTLV16292 , TMUX646 , SN74CBT16232 , SN74CBTLV16211 , TS3A27518E As per the design requirement, 32 digital lines are required to swap the signals. The below Quad part is available but needs…
    • Answered

  • TS3V712E: Video signal SW

    Resolved
    Part Number: TS3V712E Other Parts Discussed in Thread: SN74CBT16232 , TMUX646 , SN74CBT16292 Hi team, A customer is looking for a device to switch the signal from CPU and FPGA to LCD. Please see the file for system block diagram. I am thinking if…
    • Resolved

  • SN74CBT162292: Question about the bit-to-bit skew

    TI Thinks Resolved
    Part Number: SN74CBT162292 Other Parts Discussed in Thread: SN74CBT16233 , SN74CBT16292 , SN74CBT16232 , Hi team, My customer would like to use SN74CBT162292 device as 12 single-end channel, but the bit-to-bit skew should be within 2.5ns. Could you…

  • RE: SN74CB3T16212: Maximum data rate support

    Hi Rahul, Thanks for this detailed drawing. Are you open to TI's SN74CBT16232? It is a 16-channel 2:1 switch. At your NOR Flash side, you have (26+16) wires. Then, three SN74CBT16232 should be good enough to handle it. It is very cost and board…

  • RE: SN74CBT3251: May we know if SN74CBT3390 already obsolete? because i can't find in TI web.

    Hi Bogey, SN74CBT3390 is an 5V 8-channel 2:1 MUX and we do not have p2p replacement of it. I would like to know more about your customer's application because we have other channel count and configurations in 5V family. For example, SN74CBT162292…

Didn't find what you are looking for? Post a new question.