Part Number: SN74CBT3384A Other Parts Discussed in Thread: SN74CBT3384C , Tool/software: Hi Team,
My customer want to use SN74CBT3384C to P2P replace SN74CBT3384A, could you please help to share the key difference between this two device? i noticed…
Part Number: SN74CBT3384C Hi,
I have received an EOL notification letter for SN74CBT3384APWR. SN74CBT3384CPWR is proposed as a replacement for SN74CBT3384APWR.
Q1. Please tell me the difference between these two products. As far as I can confirm,…
Part Number: SN74CBT3384C The datasheet Vcc range is 4 to 5.5 V, so why does the main webpage for this part say it's a 3.3-V part?
The datasheet title also says "5-V".
Typo?
Part Number: SN74CBT3384C Hello,
I would like to confirm how to think about power consumption of SN74CBT3384C from the datasheet. The below is from the datasheet. How to think about this data?
What input is 3.4V in this case? One of V_I/O? If…
Part Number: SN74CBT3384C I had a question regarding the following part: SN74CBT3384C . On the datasheet, Digital Input LOGIC HIGH starts at 2 V. Logic LOW ends at 0.8 V. Would it be possible to use this part as a level shifter (input 3.3V to drive a…
Part Number: SN74CBT3384A Other Parts Discussed in Thread: SN74CBT3384C Good morning all,
I see on the PDN that part number SN74CBT3384ADWR is going to be discontinued and the recommended replacement is part number SN74CBT3384C P WR.
However I see…
Oba,
It is not recommended to have a voltage on the signal path without Vcc present. This device doesn't have powered off protection feature so there could be risk that the voltage on the signal path will backpower the device and turn on the switch…
Patrick,
I used the switches and multiplexers quick search tool to find several parts similar to the PI3C3384 even some pin to pin.
I searched 10 channel 1:1 SPST switches with the additional feature IOFF. IOFF feature is stating that the device…
Although the CBT3384 is not recomended for new designs their improved replacement are available. The replacements are. SN74CBT3384A SN74CBT3384C
The C-rev has undershoot protection down to -2.5V.
The CBT devices are simply n-channel FET switches so…
Thes part are for very low frequency. If you are running faster than 1Mhz you should use either
SN74CB3T3384 wich would require 3.3V Vcc
or
SN74CBT3384A - SN74CBT3384C with an external diode in series with Vcc. This would be the same type part as…
