Part Number: SN74GTL2003 Other Parts Discussed in Thread: TXS0108E , SN74CB3T3245 Hello,
I'm looking for a voltage level translation solution for an 8-bit data bus between a 5V processor and a 3.3V FPGA.
The bus is a 3-state bus managed by the processor…
Part Number: SN74GTL2003 Other Parts Discussed in Thread: TXS0108E , SN74CB3T3245 Hello,
I'm looking for a voltage level translation solution for an 8-bit data bus between a 5V processor and a 3.3V FPGA.
The bus is a 3-state bus managed by the processor…
Part Number: SN74GTL2003 Other Parts Discussed in Thread: LSF0108 Hello,
I am wondering how does SN74GTL2003 will work under the following condition.
I was wondering whether to install a pull-up resistor on the high side and low side in bidirectional…
Part Number: SN74GTL2003 Other Parts Discussed in Thread: LSF0108 Tool/software: Hi Team
My customer would like to consult with you and discuss the internal MOS action principle of SN74GTL2003. The picture below is the internal circuit of SN74GTL2003…
Part Number: SN74GTL2003 Other Parts Discussed in Thread: LSF0108 , HI
Please help me understand with below queries about pass transistor based level translators
1) How do these pass transistor-based level translators work without any pullup resistors…
Part Number: SN74GTL2003 Other Parts Discussed in Thread: TXB0108 Hi Team
I need a level translator to translate 1.5V signals to 1.8V, for this purpose I choose PN: SN74GTL2003PW
1) for this part what is the minimum voltage at the lower side(Sn) to…
Part Number: SN74GTL2003 Hello expert,
My customer is using SN74GTL2003 in their network card application, they got an issue that when they pullup 3.3V externally then the 1.8V signal will be always high and there is no function for the UART communication…
Part Number: SN74GTL2003 Other Parts Discussed in Thread: TXU0104 , SN74AXC8T245 , , LSF0108 Hi
We are using this level translator on our board for SPI interface at 6MHz.
A-side(SREF) voltage is connected to 1.2V and B-side (DREF) voltage is connected…
