Part Number: SN74HC163 Other Parts Discussed in Thread: TINA-TI Hi, I'm trying to create a Parallel Carry N-Bit Counter using the SN74HC163. I've confirmed that both the circuit and simulation work without any problems up to 8 bits. However, when I increase…
Part Number: SN74HC163 Other Parts Discussed in Thread: TXB0104 , TXU0104 , TXU0102 Tool/software: Dear Folks:
I have a project with 16 channel multiplexer 74hc163 and a power supply of +5v and GND. As I need to connect it to a raspberry Pi 4 , voltages…
Part Number: SN74HC163 Tool/software: Hello,
I am looking for thetaJC, bottom information for SN74HC163 packages J, W, and FK. Is this information available?
Thanks,
Andrea
Part Number: SN74HC163 Other Parts Discussed in Thread: SN74HC164 Hi Team,
I want to confirm if there is any small package of SN74HC164 will be pushed such as DYY, DDF, DDC... And could you share the small package information and RTM time if we have…
Part Number: SN74HC163-Q1 I want get a lower frequency signal from 1MHz with two counters .
as the picture shows.
that red name CLK signal is 1MHz, the U23 RCO pin is output signal.
If I use two counters as the picture showing, can I get a 1/256…
Hi Louis,
It looks like whoever wrote this intended it as an AND gate with the bottom and left signals as inputs and the right signal as an output -- the actual circuit is probably more convoluted than what is shown here.
I would recommend looking…
Select this link to see answers to common questions, detailed use case implementations, and part recommendations for logic and voltage translation devices. .
Top Logic and Voltage Translation FAQs - All-Time
How does a slow or floating input affect…
