Part Number: SN74HC86 Other Parts Discussed in Thread: SN74HCS86 Tool/software: Greetings, I need ibis model files for SN74HC86QDRQ1 ,It would be helpful for my analysis processes
Part Number: SN74HC86 Our company got complained about defect after delivery of component SN74HC86D. Therefore, we're wondering about clamping diode test method for it. Our flying probe tester used the method as shown in the picture.
In the above…
Part Number: SN74HC86 Hi Support Team.
In the Qualification Summary, the results of ESD-HBM and CDM are described as "See data sheet". However, the datasheet does not show the results of ESD.
Please tell me ESD data (HBM data , CDM data) of…
Part Number: SN74HCS86 Other Parts Discussed in Thread: SN74HC86 , Tool/software: We wanted to investigate the SN74HCS86; we chose the SN74HC86 for comparison.
The results were less than 1mA for all ICs, but the HCS86 had twice the VCC-pin throughput current…
Part Number: SN74HC86 Other Parts Discussed in Thread: SN74HCS86 Dears,
We purchase 80kpcs SN74HC86PWR in Jun,2021, which is used on our Industrial Sensor product. The TI order No. is T01506638.
In the production, we find there are two kinds of mark on…
Part Number: SN74HC257 Other Parts Discussed in Thread: CD74HC4075 , , SN74HC86 Hi Team
I understood logic's Tj(max) will be typically 150℃ unless otherwise specified in datasheet from following E2E link.
Just want to double-check with you.
Is it correct…
Hi Clemens-san,
I would like to check if the SN74HC86APWR with "A" is listed in the PCN. Can I assume that the SN74HC86PWR and the SN74HC86 "A" PWR are the same?
Best Regards,
Nishie
On a side note, from an academic exercise perspective, I am thinking of doing this custom single-ended to differential conversion.
Can you share your comments on the following component selections?
LM311 shall be a good choice for experimenting with a…
