• SN74HCS05-Q1: sn74hcs05qpwrq1, can you provide us with fmeda documents or evaluation documents

  

  Carl Shen

  TI Thinks Resolved

  Part Number: SN74HCS05-Q1 Hello, sn74hcs05qpwrq1, can you provide us with fmeda documents or evaluation documents related to failure mode and failure rate 谢谢！ thank you!

  • over 3 years ago
  • Logic
  • Logic forum

• RE: SN74LVC1G07-Q1: how to achieve wire-or logic?

  

  Sebastian Muriel

  Hi Elec, TI doesn't sell BJTs, if you are trying to use a buffers/inverters to create an OR gate I suggest the circuit below: I recommend the SN74LVC06A-Q1 or SN74HCS05-Q1 for the open drain inverters and SN74LVC1G04-Q1 for the inverter. Regards…

  • over 2 years ago
  • Logic
  • Logic forum

• RE: SN74LVC2G06-Q1: input clamp circuit in Vin>Vcc scenario

  

  Clemens Ladisch

  The smallest device with positive clamping diodes is something like the SN74HCS05-Q1.

  • over 2 years ago
  • Logic
  • Logic forum
Answered

• [FAQ] Can you pull-up an open-drain output to a higher voltage than the device's supply (VCC) voltage?

  

  Emrys Maier

  Resolved

  FAQ: Logic and Voltage Translation > Output Parameters >> Current FAQ This question is really about the output structure of the logic device. There are primarily two types of open-drain output structures - one with a positive clamping diode, and…

  • Resolved

  • over 4 years ago
  • Logic
  • Logic forum

• [FAQ] What are the performance specifications of the HCS logic family at 3.3V operation?

  

  Emrys Maier

  FAQ: Logic and Voltage Translation > Input Parameters >> Current FAQ This question comes up fairly often because the HCS logic family is specified only at 2V, 4.5V, and 6V. The following min / max values are interpolated from the datasheet tables…

  • over 3 years ago
  • Logic
  • Logic forum

• RE: [FAQ] Input Parameters

  

  Michael J Schultis

  .

  • over 4 years ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.