• SN74HCS11-Q1: Confirmation of the footprint issue of SN74HCS11-Q1

  

  Paul Chang

  TI Thinks Resolved

  Part Number: SN74HCS11-Q1 Tool/software: Hi Teams According to the specification, the length and width of the Footprint pad are set to 1.5mm * 0.45mm (as shown below) However, the pad downloaded from the official website is 1.41mm * 0.356mm (as…

  • over 1 year ago
  • Logic
  • Logic forum
Answered

• SN74HCS11-Q1: Functional safety information based on SN29500

  

  Yoshikazu Kawasaki

  Resolved

  Part Number: SN74HCS11-Q1 Tool/software: Hello, My customer will use SN74HCS11QPWRQ1 and needs failure rate based on SN29500 to get ISO26262 certification. I looked at the product web page, but couldn't find one. I searched for conversion method between…

  • Resolved

  • over 1 year ago
  • Logic
  • Logic forum
Answered

• SN74HCS11-Q1: Loss calculate

  

  Lin Vast

  Resolved

  Part Number: SN74HCS11-Q1 I want to calculate the loss of SN74HCS11-Q1. From CMOS Power Consumption and Cpd Calculation in the pdf, I havew some problem, PT=Cpd*VCC^2*fI*NSW NSW = number of bits switching PL=CL*VCC^2*fo*NSW NSW = total number…

  • Resolved

  • over 3 years ago
  • Logic
  • Logic forum
Answered

• SN74HCS11-Q1: Effects of temperature on switching thresholds for HCS logic family

  

  user2

  Resolved

  Part Number: SN74HCS11-Q1 For the HCS family, specifically SN74HCS11-Q1, is there any documentation to interpolate the switching thresholds at different operating temperatures?

  • Resolved

  • over 3 years ago
  • Logic
  • Logic forum

• SN74HCS11-Q1: input configuration

  

  Arie Li

  TI Thinks Resolved

  Part Number: SN74HCS11-Q1 Hi experts, Is there any current limit resistor needed at the input pins of SN74HCS11-Q1? Thanks. Arie

  • over 5 years ago
  • Logic
  • Logic forum

• RE: SN74LVC1G11-Q1: Can SN74LVC1G11-Q1 support AEC-Q100 spec

  

  Clemens Ladisch

  There is not other automotive 3-input AND gate in a single-gate package. The SN74HCS11-Q1 with three gates is AEC-Q100 qualified.

  • over 5 years ago
  • Logic
  • Logic forum

• RE: [FAQ] Input Parameters

  

  Michael J Schultis

  .

  • over 5 years ago
  • Logic
  • Logic forum

• [FAQ] What are the performance specifications of the HCS logic family at 3.3V operation?

  

  Emrys Maier

  FAQ: Logic and Voltage Translation > Input Parameters >> Current FAQ This question comes up fairly often because the HCS logic family is specified only at 2V, 4.5V, and 6V. The following min / max values are interpolated from the datasheet tables…

  • over 5 years ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.