Part Number: SN74LS279A Other Parts Discussed in Thread: TINA-TI Hello I was wondering the following,
if the SN74LS249 Inverted Flipflop can drive a 50Ohm bnc cable which is terminated on the other side with 10K.
which bnc driver should I include…
Part Number: SN74LS279A Hi Team,
What ESD(HBM) rating of SN74LS279ANSR? Although we checked datasheet and we confirmed with TI Customer support center,we could not find any information.
Best regards.
Part Number: SN74LS279A Hi,
my customer need a device to achieve:
their system will generate a low pulse duration of 10us. They need a device to output low at the falling edge of the 10us low pulse, and keep low after the 10us pulse is gone, and will…
Part Number: CD4013B Other Parts Discussed in Thread: SN74LS279A , , SN74LS74A , SN74LVC2G02 Tool/software: I am looking for an SR latch with non-inverting inputs (set, reset) and both inverted and non-inverted outputs available. CD4013B meets my requirement…
Part Number: CD4044B Other Parts Discussed in Thread: SN74LS279A Tool/software: Hi, customer ask for an alternative of MC14044B(NLV14044BDR2G) but needs automotive qualification. I found CD4044B and SN74LS279A but not sure if we can offer these in Q100…
The SN74LS279A is an outdated bipolar device, and has active-low inputs.
A R/S latch with active-high inputs can be constructed from two NOR gates , but that would not save space.
An alternative solution would be to use a set/reset latch. Integrated devices like the SN74LS279A are available only in a quad package, but you could construct one from two NAND gates (e.g., SN74LVC2G132):
Use an R-C circuit to generate a low pulse…
Part Number: SN54LS27 Subject: Clarification on SN54LS279AJ Footprint and Package Type
Hi TI Team,
Hope you are doing well.
We are using the SN54LS279AJ part in our design, which is a DIP-16 package IC. However, the footprint and land pattern information…
Part Number: SN54LS279A Hi TI Team,
The image attached below shows the land pattern for the SOP package in datasheet . However, we require the land pattern for a DIP-16 package that is not given in datasheet . www.ti.com/.../sn74ls279a.pdf
Kindly…
