Answered

• SN74LVC16T245-EP: CLVC16T245MDGGREP Data Rate

  

  ranjini r

  Resolved

  Part Number: SN74LVC16T245-EP Hi, I want to know the maximum data rate supported by CLVC16T245MDGGREP IC. Thanks in Advance Ranjini

  • Resolved

  • 1 month ago
  • Logic
  • Logic forum
Answered

• SN74LVC16T245-EP: Partial Power Down- VCC Isolation Feature

  

  Eren Erdogan

  Resolved

  Part Number: SN74LVC16T245-EP Hello TI, I have some question about partial power down and vcc isolation feature Q1: I'm planning to use translator in a system with two different voltage levels. Vcca will always be active. Vccb will turn on and off…

  • Resolved

  • 3 months ago
  • Logic
  • Logic forum

• SN74LVC16T245-EP: Frequency Parameter

  

  Mark Philip Felipe

  TI Thinks Resolved

  Part Number: SN74LVC16T245-EP Other Parts Discussed in Thread: SN74AVCB164245-EP Hi Team, would like to use the sn74lvc16t245-ep to perform voltage translation on a clock running at 16MHz along with the data clocked by this clock. Is this part suitable…

  • 5 months ago
  • Logic
  • Logic forum
Answered

• SN74LVC16T245-EP: jitter, skew, rise time?

  

  Aaron Spaete

  Resolved

  Part Number: SN74LVC16T245-EP Team, My customer has the following question: I guess that the part that I am not clear on is that where in the datasheet are these parameters that are mentioned below? I would expect to see jitter, skew, rise time / fall…

  • Resolved

  • 5 months ago
  • Logic
  • Logic forum

• SN74LVC16T245: Data rate questions - FPGA 2.5V to 1.8V translation

  

  Dima Grinko

  TI Thinks Resolved

  Part Number: SN74LVC16T245 Other Parts Discussed in Thread: SN74LVC827A , SN74AUC16244 , SN74AUC244 , SN74AUCH16244 , SN74AUCH244 My customer request to translate 10 bits from 2.5V FPGA to 1.8V, I suggest the SN74LVC16T245 due to >100Mbps data rate, assuming…

  • 7 months ago
  • Logic
  • Logic forum

• SN74LVC16T245: Interference in ground isolate

  

  SAMUEL ROBALINO

  TI Thinks Resolved

  Part Number: SN74LVC16T245 Other Parts Discussed in Thread: DRV135 , , LSF0108 , SN65HVD82 , SN74CBTD3384 Hi Everyone, I use SN74LVC16T245DGGR to translate voltage level between MCU (3.3V) and RS485 transceiver (5V). Aditional, MCU generates audio tone then…

  • 8 months ago
  • Logic
  • Logic forum

• SN74LVC16T245: SN74LVC16T245

  

  smita wale

  TI Thinks Resolved

  Part Number: SN74LVC16T245 regarding unused pins termination-: 1) Unused output can keep open.No need to have pull-up or pull down.Is it right? 2)Unused inputs can we tied directly to GND or do we have to use some resistor lets say 20kohm to pull-down…

  • over 1 year ago
  • Logic
  • Logic forum
Answered

• SN74LVC16T245: Design Review

  

  Matthew Crocker

  Resolved

  Part Number: SN74LVC16T245 Other Parts Discussed in Thread: SN74LXC8T245 Hello, I was hoping for a quick review of my usage of the SN74LVC16T245 in the linked schematic. Broadly just a confirmation of correct usage and specifically that the non-use of…

  • Resolved

  • 10 months ago
  • Logic
  • Logic forum

• SN74LVC16T245: Thermal Shock

  

  Cedrick

  Part Number: SN74LVC16T245 Hi, Good day. Our customer would like to know if the SN74LVC16T245 would get damaged if the chip is given +70 degrees and sharply cooled to -40 degrees (thermal shock). Thank you. Regards, Cedrick

  • over 1 year ago
  • Logic
  • Logic forum

• SN74LVC16T245: Device failed at -40C

  

  Danilo A.

  Part Number: SN74LVC16T245 Hi Team, We would like to ask your help regarding the issue with SN74LVC16T245DGG at -40C. Here are the details from our customer. The chip SN74LVC16T245DGG in the datasheet is written transition temperature -40 to +150 in the…

  • over 1 year ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.