Part Number: SN74LVC1G175-EP Hi Team,
Can you help provide the Junction temperature range (Tj(C)) for the CLVC1G175MDCKREP?
This information is not specified in the datasheet and is needed for my customers application. ( https://www.ti.com/lit/ds/symlink…
Part Number: SN74LVC1G175 Hi Team,
One of our customer need to do some simulation with SN74LVC1G175 using the TI TINA. Pls advise do we have any PSpice model for SN74LVC1G175 to share?
Is it possible to convert the SN74LVC1G175 HSpice model to PSpice…
Part Number: SN74LVC1G175-EP Other Parts Discussed in Thread: SN74LVC1G175 Hi Team,
Datasheet of this device mentions that there is an available Military Grade option. However it is not clear which part number is the Military grade.
Part Number: SN74LVC1G175 Team,
Customer is using SN74LVC1G175 for battery pack. They have a question that datasheet doesn't mention:
1. What is the structure of Q output? Is it a push-pull output connecting to VCC internally or it needs to add a pull…
Part Number: SN74LVC1G175 Other Parts Discussed in Thread: SN74LVC1G373 Hi,
Does TI offer a level triggered D flip flop? We currently use the edge triggered version however we need level triggered.
Part Number: SN74LVC1G175 Dears,
My customer is designing water meter need lowest Iq.
So query how to config for SN74LVC1G175.
And find Ii and Icc is similair test conditions but why Ii is 1uA, Icc is 10uA?
What different about Ii and Icc
Part Number: SN74LVC1G175 Other Parts Discussed in Thread: TPS22810 , SN74HCS72 , SN74LVC2G17 , SN74LVC1G74 Hi Sir,
My customer would like to design a button to enable/disable the power, the main purpose is to save the power consumption.
Short press to turn…
Part Number: SN74LVC1G175 Other Parts Discussed in Thread: SN74HCS72 I have a customer considering D-FF for a clock sync setup.
But they either need <5ns tpd or >10ns tpd for propagation delay from xCLK to Q
The DS lists the Max/Min over temp given…
Part Number: SN74LVC1G175 Hello,
I have a customer starting board bring up and they are wishing to test before applying power, they have asked if we have a FMEA analysis (pin to adjacent pins, pin short to gnd, pin short to power supply, open pin) for…
Part Number: SN74LVC1G175 Other Parts Discussed in Thread: SN74AUP1G17 Hello team,
Do we have spec of minimum time of falling edge time?
We found that if the falling time of CLK is longer, the happen of abnormal Q output will occur. The following are…