Clemens,
I found a short between IC32 Output (Y) and IC69 input (B) which is not the intended connection.
So, I lifted these pins and wired to the inputs of correct devices as shown in schematic snaps. with this rework also, I still see same step behavior…
Part Number: SN74LVC1G32 Other Parts Discussed in Thread: 5-8-LOGIC-EVM Tool/software: My customer is looking for some insight into the following regarding the data sheet.
In page # 6, do I need to add these lumped components?, if so could you provide…
Part Number: SN74LVC1G32 Tool/software: Hi team,
I'd like to ask you if SN74LVC1G32DRY2, SN74LVC1G08DRY2, SN74LVT245BRGYR, SN74LVC2G125DCTR are monolithic or not.
Could you please let me know?
Thanks
Part Number: SN74LVC1G32 Other Parts Discussed in Thread: SN74AHCT1G32 Tool/software: Can you confirm what state the output will be of the SN74LVC1G32 when the input is between Vil and Vih? In this application, Vcc=5V. So what are the conditions when…
Part Number: SN74LVC1G17 Tool/software: Hi, this question is not specifically about the part number stated above, but more of understanding Schmidt Trigger. I read this application note and saw this statement highlighted in yellow. May I know in which…
Part Number: SN74LVC1G32 Tool/software: Hi,
We use the SN74LVC1G32 and our QC feedback the leadfream has some updated between the new chip and Previous chip,
Please refer to below pirture and advise if there are any PCN file for this updated?
Part Number: SN74LVC1G32-Q1 Other Parts Discussed in Thread: SN74LVC1G08 Tool/software: Hello Team,
I would have a follow up question to already closed question from this thread: https://e2e.ti.com/support/logic-group/logic/f/logic-forum/1404713/sn74lvc1g32…
Part Number: SN74LVC1G32 Tool/software: Hi Team,
What is the VOH and VOL levels when VDD=3.3V and VDD=5V??
There is no detail given in datasheet.
Regards,
Vidhya
Part Number: SN74LVC1G32-Q1 Other Parts Discussed in Thread: SN74LVC1G97-Q1 Tool/software: Hello Logic Team,
I have a question on the rise/fall time of logic device SN74LVC1G32-Q1.
The supply voltage is 3.3V and, therefore 33ns. Can this be interpreted…
Other Parts Discussed in Thread: SN74LVC1G32-EP Tool/software: What is the difference between "SN74LVC1G32MDBV" and "SN74LVC1G32MDBVREP"?
Do you have any details on the difference between the two parts?
