• SN74LVC1G3208: WCSP package pin order check

  

  Will Wang47

  TI Thinks Resolved

  Part Number: SN74LVC1G3208 Hi team, Could you help clarify SN74LVC1G3208YZPR, if the A1 pin in package outline is pin 1 in the following bottom view? Regards, Will

  • 3 months ago
  • Logic
  • Logic forum
Answered

• SN74LVC1G3208: Theta JC Value

  

  Jejomar Ildefonso

  Resolved

  Part Number: SN74LVC1G3208 Hi Team, Do we have data on the Theta JC value for SN74LVC1G3208DCKR? Thanks in advance! Kind Regards, Jejomar

  • Resolved

  • 7 months ago
  • Logic
  • Logic forum

• SN74LVC1G3208: Power consumption check with 700khz clock input

  

  Will Wang47

  TI Thinks Resolved

  Part Number: SN74LVC1G3208 Hi team, Customer use SN74LVC1G3208DCKR in their project. Their A & B input are keep high; C input is 700kHz clock signal. Their power supply is 1.8V, they now see 140uA ICC; could you help check the power consumption under…

  • 7 months ago
  • Logic
  • Logic forum

• SN74LVC1G3208: Check the max input signal data rate

  

  Will Wang47

  TI Thinks Resolved

  Part Number: SN74LVC1G3208 Hi team, Customer would like use SN74LVC1G3208 in their project. There is one question, when A, B is high, the C input is 2MHz 50% duty signal, does is OK for SN74LVC1G3208 work with the 2MHz signal? I think this is OK…

  • 8 months ago
  • Logic
  • Logic forum

• SN74LVC1G3208: SN74LVC1G3208

  

  johnson.zhang

  Part Number: SN74LVC1G3208 we use SN74LVC1G3208 with 3.3v power source. it always is damaged. can we use input 5v voltage level for it ?

  • over 3 years ago
  • Logic
  • Logic forum

• SN74LVC1G3208-EP: Testing parameters with a VCC of 3.3

  

  Veronica Lacerda

  Answer Suggested

  Part Number: SN74LVC1G3208-EP In the electrical characteristics on the data sheet, for II (A input), II (B input), II (C input), It has the VI as 5.5V and the VCC as 5.5V and then 0V. Could this be tested at VCC of 3.3V? If this can be tested at VCC=…

  • over 3 years ago
  • Logic
  • Logic forum

• SN74LVC1G3208: output voltage about SN74LVC1G3208

  

  Lin_Charles

  TI Thinks Resolved

  Part Number: SN74LVC1G3208 Hi team, If we apply 3.3V to VCC, and add pull up resistor on the output, Y, it there any risk to such application?

  • over 6 years ago
  • Logic
  • Logic forum
Answered

• SN74LVC1G3208-Q1: Temperature range of CLVC1G3208

  

  Takahiro Saito

  Resolved

  Part Number: SN74LVC1G3208-Q1 Hi team, Customer is looking for the alternatives of CLVC1G3208IDCKRQ1 which has -40C ~ 105C or wider temperature range. I found SN74LVC3208IDCKR has such a temperature range with same performance. But, I wonder why…

  • Resolved

  • over 5 years ago
  • Logic
  • Logic forum
Answered

• SN74LVC1G3208-EP: Trace Code

  

  Carl Ballard

  Resolved

  Part Number: SN74LVC1G3208-EP Hello. How can I decipher the date code out of the SN74LVC1G3208-EP trace code? Thank you.

  • Resolved

  • over 6 years ago
  • Logic
  • Logic forum
Answered

• SN74LVC1G3208-Q1: AEC or not?

  

  Jeff Hanson

  Resolved

  Part Number: SN74LVC1G3208-Q1 Other Parts Discussed in Thread: SN74LV123A-Q1 DK thinks it is, and -Q1 implies it, but the datasheet doesn't list AEC qualification.

  • Resolved

  • over 7 years ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.