Answered

• SN74LVC1T45-EP: SN74LVC1T45-EP

  

  Evgeny Vaintraub

  Resolved

  Part Number: SN74LVC1T45-EP Other Parts Discussed in Thread: SN65HVD233-EP , , SN74LVC1T45 Tool/software: Hi, I use Can Bus transceiver PN - SN65HVD233-EP which is connected through a level converter - SN74LVC1T45-EP to FPGA , as shown in the attached…

  • Resolved

  • over 1 year ago
  • Logic
  • Logic forum
Answered

• SN74LVC1T45-EP: Bi-directional level shifter with output enable feature

  

  Robert Dayton

  Resolved

  Part Number: SN74LVC1T45-EP Hi team at TI, I am searching for a 5v input bi-directional level translator such as the SN74LVC1T45MDCKREP, however am only able to locate bi-directional without the output enable. Would you have a comparable model? …

  • Resolved

  • 1 month ago
  • Logic
  • Logic forum

• SN74LVC1T45-EP: SN74LVC1T45-EP

  

  Ramgopal Divakar

  TI Thinks Resolved

  Part Number: SN74LVC1T45-EP Other Parts Discussed in Thread: SN74LVC1G17-EP I need to drive a 3.3V logic signal 3m on a cable. Can I use this device to translate it to 5V and then re translate it back to 3.3V? It is used not a high speed signal. More…

  • over 6 years ago
  • Logic
  • Logic forum

• SN74LVC1T45-EP: Thermal Characteristics

  

  Dan Abbey

  TI Thinks Resolved

  Part Number: SN74LVC1T45-EP Hi Team, Please could you share the below to support an ongoing design using SN74LVC1T45MDCKREP: Junction to Board thermal resistance / Theta jB Junction to Case thermal resistance / Theta jC Thanks, Dan

  • over 4 years ago
  • Logic
  • Logic forum

• SN74LVC1T45-EP: SN74LVC1T45-EP

  

  Paul Therrien95

  TI Thinks Resolved

  Part Number: SN74LVC1T45-EP I need to know what the recommended value resistor to use as a pull down or pull up on both data lines. This can be referenced on Page 15 of the data sheet. Thanks, Paul

  • over 7 years ago
  • Space & High Reliability (Read Only)
  • Space & High Reliability Forum (Read Only)
Answered

• SN74LVC1T45-EP: Max Load Capacitance

  

  Yair Lior

  Resolved

  Part Number: SN74LVC1T45-EP We are using SN74LVC1T45MDCKR-EP in our circuit for driving 5V logic. There is a question regarding the maximum allowed load capacitance. What is the maximum load capacitance and if it is a function of frequency,…

  • Resolved

  • over 5 years ago
  • Logic
  • Logic forum
Answered

• SN74LVC1T45-Q1: About θja of SN74LVC1T45-EP and SN74LVC1T45-Q1

  

  Noritomo Harukawa

  Resolved

  Part Number: SN74LVC1T45-Q1 Other Parts Discussed in Thread: SN74LVC1T45-EP , Customers are considering SN74LVC1T45-EP in automotive applications. The operating temperature range is from -40°C to 125°C. There is SN74LVC1T45-Q1 as a similar product.…

  • Resolved

  • over 8 years ago
  • Logic
  • Logic forum
Answered

• SN74LVC1T45-EP: Input Impedance

  

  Michael T Schneider

  Resolved

  Part Number: SN74LVC1T45-EP Team, can we confirm the below? I am trying to verify that the normal operating input impedance for the ‘A’ input on the SN74LVC1T45-EP IC is above 100k ohm. Any help with resolving this would be much appreciated.

  • Resolved

  • over 6 years ago
  • Logic
  • Logic forum
Answered

• SN74LVC1T45-EP: leakage in power domains

  

  Emma Wang

  Resolved

  Part Number: SN74LVC1T45-EP Other Parts Discussed in Thread: SN74LVC1T45 There is leakage in the VCCA and VCCB power domains for SN74LVC1T45. if the 74LVC1T45-EP chip has improved this problem, or it still exists? If there is a buffer with no leakage…

  • Resolved

  • over 7 years ago
  • Space & High Reliability (Read Only)
  • Space & High Reliability Forum (Read Only)

• SN74LVC2T45-EP: SN74LVC1T45-EP : Rθ(JB) Junction to Board resistance of the Components

  

  Ankur Anand

  TI Thinks Resolved

  Part Number: SN74LVC2T45-EP We would like to know R θ(JB) Junction to Board resistance of the Components SN74LVC2T45MDCTTEP SN74LVC1T45MDCKREP Request you share the data ASAP.

  • over 6 years ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.