Answered

• SN74LVC1T45-Q1: Use Satellite project

  

  ? ??

  Resolved

  Part Number: SN74LVC1T45-Q1 Other Parts Discussed in Thread: SN54SC4T125-SEP Tool/software: Hello experts, We want to use SN74LVC1T45-Q1 to the satellite project. Are there any restrictions on using it on satellites? We are understanding that is…

  • Resolved

  • over 1 year ago
  • Logic
  • Logic forum

• SN74LVC1T45-Q1: Does it have Latch-up performance based on JESD-78?

  

  Yuto Kitamura

  TI Thinks Resolved

  Part Number: SN74LVC1T45-Q1 Other Parts Discussed in Thread: SN74LVC1T45 , Dear team, Does SN74LVC1T45-Q1 have Latch-up performance based on JESD-78 that non-Q1(SN74LVC1T45) has? SN74LVC1T45 datasheet mention as below, but -Q1 not. Best regards…

  • over 1 year ago
  • Logic
  • Logic forum

• SN74LVC1T45-Q1: SN74LVC1T45QDCKRQ1

  

  Roy Chan

  TI Thinks Resolved

  Part Number: SN74LVC1T45-Q1 Hi Teams: We would like calculate functional safety Failure rate, Is the SN74LVC1T45QDCKRQ1 have FIT functional safety report ? thank you Roy

  • over 2 years ago
  • Logic
  • Logic forum
Answered

• SN74LVC1T45: SN74LVC1T45-Q1 pull up resistor on DIR pins.

  

  Zhizhao Niu

  Resolved

  Part Number: SN74LVC1T45 Hi Team, May I know if I can directly pull up the SN74LVC1T45-Q1 DIR pin without pull up resistor? Thanks. B.R. Lucas

  • Resolved

  • over 3 years ago
  • Logic
  • Logic forum

• SN74LVC1T45-Q1: Input voltage at B input higher than VCCB

  

  Carsten Koeck

  TI Thinks Resolved

  Part Number: SN74LVC1T45-Q1 Is it possible to supply VCCB with 1.8V while having a 5V input at Input B? Looking at the datasheet and reading through the values there seems to be no positive clamping diode as the input clamping current can only…

  • over 2 years ago
  • Logic
  • Logic forum
Answered

• SN74LVC1T45-Q1: Pin setting

  

  Masakazu Adachi

  Resolved

  Part Number: SN74LVC1T45-Q1 Hello team, I received a question from the customer, Is there any problem if there is a time difference (a few seconds to a dozen seconds) between VCC2 applied to pin 6 and pin 4? Regards, Masa

  • Resolved

  • over 3 years ago
  • Logic
  • Logic forum
Answered

• SN74LVC1T45-Q1: Risk on power up VCCA before VCCB

  

  Lucas Wassenius

  Resolved

  Part Number: SN74LVC1T45-Q1 Hi Team, Customer has a design where they power on VCCA 1.8V rail before VCCB 3.3V/5V. Datasheet mentions: Is there any risk involved with power sequencing VCCA before VCCB? Kind regards, Lucas

  • Resolved

  • over 3 years ago
  • Logic
  • Logic forum

• SN74LVC1T45-Q1: I am having trouble with a device attached to the A port

  

  TI-CSC

  Part Number: SN74LVC1T45-Q1 Hello E2E Experts, Good day. I am using a voltage translator SN74LXC1T45QDCKRQ1, and I am having trouble with a device attached to the A port of the SN74LXC1T45QDCKRQ1. The sensor attached to this port is failing and…

  • over 2 years ago
  • Logic
  • Logic forum
Answered

• SN74LVC1T45-Q1: VCC and I/O signal

  

  Liu Yang

  Resolved

  Part Number: SN74LVC1T45-Q1 Hi Team, When VCCB is on and VCCA is off, if signal input to VCCA side I/O A, is there any problem? When both VCCA and VCCB is on, if VCCA=1.8V while 3.3V signal input to VCCA side I/O A, is there any problem? Beat Regards…

  • Resolved

  • over 4 years ago
  • Logic
  • Logic forum
Answered

• SN74LVC1T45-Q1: Default state

  

  G pandi

  Resolved

  Part Number: SN74LVC1T45-Q1 Hi, In our project we are using SN74LVC1T45QDCKRQ1 Non inverting level shifter. In this chip with out providing any input what is the default state of the out pin ???? Thanks & Regards pandi

  • Resolved

  • over 4 years ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.