Part Number: SN74LVC2244A Tool/software: To whom it may concern,
I am reaching out on behalf of my employer to request a letter of volatility (LOV) for part SN74LVC2244A. The LOV will be used to develop sanitization procedures for hardware which this…
Part Number: SN74LVC2244A Tool/software: To whom it may concern,
I am reaching out on behalf of my employer to request a letter of volatility (LOV) for part SN74LVC2244A. The LOV will be used to develop sanitization procedures for hardware which this…
Part Number: SN74LVC2244A Tool/software: Hi Team,
In the customer's waveform, the falling edge overshoot is as low as -1.84V. Does this risk damaging the device? I want to double check if there is a transient spec for Vi,min?
Regards, Hailiang
Part Number: SN74LVC2244A Tool/software: Hi team,
customer use SN74LVC244 in their test system, and they found that when input is float by mistake, one device output high voltage and another device output low voltage on same board. I have explained…
Part Number: SN74LVC2244A Hi Expert,
My customer wants to do a simple OVP in front of the SN74LVC224 signal (1Ax / 2Ax) through a series resistor. According to the specifications, only the clamp current is -50mA when VI < 0V.
Will clamping occur when…
Part Number: SN74LVC2244A Dear expert,
I have a quaestion about SN74LVC2244A.
I want to use this chip to fanout signal from 1 input to 20 outpout to another board by short FPC cable(10cm) to FPGA convert card.
the signal rate is less than 1M.
…
