• 

  Frank Xiao

  • 22 days ago
  • Logic
  • Logic forum

  SN74LVC2G07: input signal of the device SN74LVC2G07 has risks?

  • Resolved

  Part Number: SN74LVC2G07 Hi team, My customer is using the SN74LVC2G07 now. Currently the input
• 

  Albert Xu1

  • 20 days ago
  • Logic
  • Logic forum

  RE: SN74LVC2G07: DC I/O level clarification

  Hi Vignesh, I believe these FAQs should be able to help: [FAQ] What method is best used for estimating specification values between those given in the datasheet? [FAQ] How do I determine the output voltage (VOH, VOL) or output current (IOH, IOL) of...
• 

  Go Bravos

  • 1 month ago
  • Logic
  • Logic forum

  SN74LVC2G07: Two Output Currents?

  • Resolved

  Part Number: SN74LVC2G07 Team, There are two output currents listed in the datasheet
• 

  Vignesh M26

  • 3 months ago
  • Logic
  • Logic forum

  SN74LVC2G07: Different IO in two seperate pins- open drain

  • Resolved

  Part Number: SN74LVC2G07 Hi, Can we use VCC=1.8V, 1A = 1.8V pull up 2B = 5V pull up 1Y= 3.3V pull
• 

  Frank Xiao

  • 6 months ago
  • Logic
  • Logic forum

  SN74LVC2G07: The input is about -570mv a little larger than the datasheet spec -0.5v, Does it has risks and what's the risks?

  TI Thinks Resolved

  Part Number: SN74LVC2G07 Hi team, My customer is using the SN74LVC2G07 now. The input is about -570mv a little larger than the datasheet spec -0.5v, Does it has risks and what's the risks?
• 

  John Chou62

  • 5 months ago
  • Logic
  • Logic forum

  SN74LVC2G07: no output fail condition

  Part Number: SN74LVC2G07 hi Team, we have a SN74LVC2G07 return that has no output signal when input is applied it's observed that the resistance measured from the Vcc to Vss is 6k, while the resistance measurement from a good IC is 21K~22K ...
• 

  David Tandri

  • 7 months ago
  • Logic
  • Logic forum

  SN74LVC2G07: Verifying DCK Package Orientation

  • Resolved

  Part Number: SN74LVC2G07 Hi, I would like to verify the location of PIN 1 of SN74LVC2G07 chip
• 

  Salvador de Leon1

  • 6 months ago
  • Logic
  • Logic forum

  SN74LVC2G07: Max Junction Temperature

  TI Thinks Resolved

  Part Number: SN74LVC2G07 What is the Max Junction Temperature Rating?
• 

  Brad Lin

  • 1 month ago
  • Amplifiers
  • Amplifiers forum

  LMH6611: [LMH6611] pullup resistor on SN74LVC2G07 output to drive LMH6611

  Part Number: LMH6611 Hi, sir/madame: We are driving the Op-amp LMH6611 by an open-drain buffer SN74LVC2G07 (waveform below). The 3.3V input to SN74LVC2G07 is shown in channel 2 and the 1.2V output from LMH6611 is shown in the channel 1. The swing of...
• 

  Mark Philip Felipe

  • 9 months ago
  • Logic
  • Logic forum

  SN74LVC2G07: SN74LVC2G07DSFR Thermal Information

  TI Thinks Resolved

  Part Number: SN74LVC2G07 Hi Team, We are hoping if you can assist us get the thermal information of this device. Thank you in advance.

Didn't find what you are looking for? Post a new question.

• Ask a new question