Part Number: SN74LVC2G14 should i just leave the output channel pin which is unused as open and unconnected ?
since this is a cmos and as i am grounding the unused input pin i do not want to create a path from VCC to GND ( short circuit) on the output…
Part Number: SN74LVC2G14 Hello team,
i am shweta from Knorr bremse technology center india, we are using SN74LVC2G14DCKT this part in one of our project while checking its IBIS model i found the power and Ground clamp diode are not working, i checked…
Part Number: SN74LVC2G14-Q1 Hello,
Regarding the SN74LVC2G14-Q1 (specifically PN SN74LVC2G14IDCKRQ1) datasheet, Revision E (dated Jan 2025) of the datasheet updated the operating free air temperature from 85°C to 125°C. Would this updated operating…
Part Number: SN74LVC2G14-Q1 Dear Team
We are currently performing an FMEDA for our project. To complete our analysis, we urgently require the following information:
data Failure mode distribution / percentage breakdown
Pin FMA & FMD documents…
Part Number: SN74LVC2G14 Tool/software: To whom it may concern,
I am reaching out on behalf of my employer to request a letter of volatility (LOV) for part SN74LVC2G14. The LOV will be used to develop sanitization procedures for hardware which this…
Part Number: SN74LVC2G14 Tool/software: May I ask a question?
For the SN74LVC2G14 inverter,
can it be used in this way: connect VCC to 6.3V and gnd to 3.3V?
If possible, when will 6.3V be output and what will be the low level output? thanks
Part Number: SN74LVC2G14-Q1 Dear Team
We are currently performing an FMEDA for our project. To complete our analysis, we urgently require the following information:
FIT (Failures‑In‑Time)
data Failure mode distribution / percentage breakdown …
Part Number: SN74LVC2G14 Other Parts Discussed in Thread: TINA-TI Hi Team,
Our customer asked that whether do we have TINA model of SN74LVC2G14?
They want to add SN74LVC2G14 in their TINA simulation circuit,
thanks
