Part Number: SN74LVC2G14-Q1 Other Parts Discussed in Thread: SN74LVC2G14
Dear expert,
Is there any plan to update SN74LVC2G14-Q1 or other similar part in roadmap available to support 125C Ta?
And I cannot find Tj in datasheet. What is Tj for SN74LVC2G14…
Part Number: SN74LVC2G14-Q1 Other Parts Discussed in Thread: SN74LVC2G14 Hi team, It is an Auto-motive grade, but why is the datasheet at 85 °C?
SN74LVC2G14(Non-Q1) is a 125 ° C guarantee. Sincerely. Kengo.
Part Number: SN74LVC2G14-Q1 Hello,
I'm using the IC for relaxation oscillator, and I want to calculate the tolerance of my circuit.
Operate temperature is -40 degrees to 125 degrees
Operate VCC = 4.9V to 5.1V,
so is there any formula or curve relation…
Part Number: SN74LVC2G14-Q1 Hi Expert,
The engineer is asking the (VIH VIL VOH VO) tolerance information from low and high temperature rating.
Thanks
Best regards,
Eric Lai
Field Application Engineer
Texas Instruments Taiwan Limited
O: +886-2-2175…
The lead finish is specified in the "Ordering & quality" table on the SN74LVC2G14-Q1 product page.
"Sn | NiPdAu" means that there are multiple manufacturing sites, and that you get either Sn or NiPdAu. It is not possible to control this when…
Other Parts Discussed in Thread: SN74LVC2G14 , SN74LVC2G17-Q1 I would like to know why the automotive version of the SN74LVC2G14 is only rated from -40 to 85C when the non-inverting, automotive version (SN74LVC2G17-Q1) is rated from -40 to 125C. Is this…
Part Number: TCAN1051-Q1 Other Parts Discussed in Thread: TCAN1051 , SN74LVC2G14 , SN74LVC2G132 Hi,
Can i get a CAN repeater without any MCU or CPU? Use two TCAN1051 and some logics?
Part Number: SN74LVC1G175 Other Parts Discussed in Thread: SN74HCS74 , SN74HCS74-Q1 , SN74LVC2G17 , , SN74LVC2G14 The target is using a D type Flip-Folp to make a rising edge controled power supply.
Here is the Sehematic.
The first status is FR_GND pulled…
Hello Jason-san,
74LVC2G14-Q1 and 74LVC374A-Q1 are the only load for the two cases.
Customer is considering the circuit that convert switch state to 3.3V logic state and did not tested.
They want to know how these circuit works.
Customer changed the…